| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Injectors http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82450 |
Page 1 of 1 |
| Author: | dan86 [ Mon Jun 22, 2015 5:21 pm ] |
| Post subject: | Injectors |
Anybody tell me what size pipe I need to do a leak off test. Is it 3mm i.d? 2003 KJ Liberty 2.5 CRD |
|
| Author: | rankom [ Mon Jun 22, 2015 10:37 pm ] |
| Post subject: | Re: Injectors |
to make a home made tool you need a pvc soft clear hose inner id 1/8 outside id 1/4 4 hoses 3ft long . remove return hose assembly put it in hot water to make it softer , easier to remove plastic t connectors , don't brake them . hook up clear hoses cap other side of t connectors install each t connects onto injectors secure with clips , get 4 small glass cups tape them drill holes through there lids push hoses in run engine 2 min at idle check fuel level ,must be almost same |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|