Where is the location of the two transmission filters for the CRD? I know one is inside the pan, but have been unable to locate where the second one is.

Also, do you know if the stock CRD tranmisssion (545rfe?) has a deep style transmission pan, or a shallow one?

Thanks for all of your help.

_________________
2005 Jeep Liberty CRD Sport
GDE EcoTune w/ Hot Tune on stand by
Old Man EMU 2" Lift, upgraded control arms
SunCoast Torque Converter
HDS Model 001 Thermostat
Weeks Stage 1
Mann Provent 200
Fumoto Oil Valve

_________________
U.S. Army Retired

As you see from flash's picture, both of the filters are inside the pan, and as far as I can see, its a shallow pan. A deep pan like the PML fouls any skid plate you fit, unless you space the plate away from the mounting.

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

Yes, Both Inside the pan.

Be careful with the spin on filter as to not cross thread it or over tighten it. The Filter screws in on a plastic thread so its easy to force it and sometimes hard to start.

_________________
05 CRD Limited GDE Hot Tune, EuroTC, ARPs, Full EGR Del, IDParts Hoses, Etecno 7v GP, OME 790 Bilstein 916front, OME948 OME N132Lrear, JBA A-Arms, 245/75/16 Duratracs+Moabs, Renegade roof lights, Curt Front Hitch, BTF Kryptonite Diff, JCR Stage2 Rails, SkidRow Skids, HDS Tstat,

Sold 06 CRD Limited K&N, EHM, ORM, EuroTC, TransgoKit, Samcos