| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Injector return flow test? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82526 |
Page 1 of 1 |
| Author: | flash7210 [ Thu Jul 02, 2015 5:17 pm ] |
| Post subject: | Injector return flow test? |
When doing the injector return flow test, at idle, how fast should the bottles be filling? Because I just did this test and it was barely a trickle. Although all four injects seemed about the same with #2 being slightly more than the others. |
|
| Author: | Mountainman [ Thu Jul 02, 2015 5:33 pm ] |
| Post subject: | Re: Injector return flow test? |
A slow trickle is right, I never used bottles so I can't give you good measurements though. I think the main thing is that they are close to the same. I think there's a spec for how close they should be. |
|
| Author: | rankom [ Thu Jul 02, 2015 6:30 pm ] |
| Post subject: | Re: Injector return flow test? |
good ,injector are ok |
|
| Author: | flman [ Tue Jul 07, 2015 6:46 pm ] |
| Post subject: | Re: Injector return flow test? |
Take a look at this leak off test. http://sprinter-source.com/forum/showthread.php?t=17149 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|