LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

SasquatchParts.com • Parts for your ​Jeep Liberty 2.8L CRD
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82759
Page 1 of 2

Author:  weeks101 [ Tue Aug 04, 2015 11:26 am ]
Post subject:  SasquatchParts.com • Parts for your ​Jeep Liberty 2.8L CRD

Image

SasquatchParts.com
Liberty 2.8L CRD Parts


We are proud to be a LOST Jeeps Supporting Vendor

Author:  weeks101 [ Tue Aug 04, 2015 11:26 am ]
Post subject:  Re: SasquatchParts.com • 2005-2006 Liberty 2.8L CRD Performa

Reserved

Author:  weeks101 [ Tue Aug 04, 2015 11:26 am ]
Post subject:  Re: SasquatchParts.com • 2005-2006 Liberty 2.8L CRD Performa

* Reserved *

Author:  Silverbullet [ Sat Oct 31, 2015 2:25 pm ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

Just wanted to chime in and mention this tool SAVED me during the install of stage one. Hoping to complete stage 2 soon.

I wish I had this for the first CRD I did!!!

http://www.amazon.com/gp/product/B0050K ... detailpage

That exact tool or something like it

Author:  weeks101 [ Mon Apr 18, 2016 9:55 pm ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

Interest in plug-and-play in-tank lift-pump wiring harness?

viewtopic.php?f=5&t=84374

Author:  JAFO [ Fri Apr 22, 2016 3:41 pm ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

How do I get the CEL to go out after I install the kit?

Author:  weeks101 [ Fri Apr 22, 2016 3:55 pm ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

Reserved

Author:  JAFO [ Fri Apr 22, 2016 5:38 pm ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

weeks101 wrote:
JAFO wrote:
How do I get the CEL to go out after I install the kit?

If you have the stock ECU tune, your check engine light will illuminate after installation–your engine will run just fine, but your ECU will trigger a CEL because it isn’t receiving the expected communications from the EGR valve and FCV valve. An ECU flash is needed to turn it off. You can choose a turn-key, commercially-available tune OR you can flash your own ECU using a laptop, free software and an inexpensive data cable.​ There are even tunes available for download that you can use completely free.

1) D.I.Y. ECU Tuning (do it yourself) - viewtopic.php?f=98&t=78418
2) Green Diesel Engineering (commercial) - http://www.greendieselengineering.com/S ... ry=Liberty


Awesome tip and TY!

Author:  lacabrera [ Sat Apr 23, 2016 5:52 am ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

JAFO wrote:
How do I get the CEL to go out after I install the kit?


if you wish you can add 2 30 cent resistors to fool the ECU into thinking the EGR and FCV are still connected.

Author:  Jetman46 [ Tue Jun 07, 2016 3:48 am ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

I have installed both the Weeks 1 & 2 kits. Also have the Green Diesel ECO tune. Went through emissions testing today here in Arizona. They put it on the rollers and passed with flying colors.

Author:  weeks101 [ Tue Jun 07, 2016 12:27 pm ]
Post subject:  Re: SasquatchParts.com • KJ 2.8L CRD Performance • 'Weeks Ki

Jetman46 wrote:
I have installed both the Weeks 1 & 2 kits. Also have the Green Diesel ECO tune. Went through emissions testing today here in Arizona. They put it on the rollers and passed with flying colors.

Nice! :JEEPIN:

Author:  blk05liberty [ Wed Oct 05, 2016 9:53 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

How long are the tool rentals for?

Author:  weeks101 [ Wed Oct 05, 2016 9:58 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Customer has them for 14 days total. (Time in transit not counted towards the rental period.)

If you need timing belt replacement parts we have you covered: https://shop.sasquatchparts.com/product ... berty-crd/

Author:  CRD Joe [ Sat Oct 29, 2016 4:56 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Ive got the SquatchMeisters EGR see ya later kit. (Stage 1&2) Its some seriously cool stuff! Im thinking about getting a diesel Grand Cherokee and if so Ill be getting the delete kit for that as well. If any of you are even thinking about this do it. Who knows how long they'll be available?

Author:  blk05liberty [ Mon Oct 31, 2016 3:06 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Question about the EGR kit (weeks kit) Do you get both stages in one purchase? or do you have to buy each weeks kit separately?

Author:  weeks101 [ Mon Oct 31, 2016 6:22 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Reserved

Author:  Johndeere87 [ Mon Nov 14, 2016 8:27 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

I have the switch/voltmeter panel from Sasquatch parts. There wouldn't be any harm in wiring the voltmeter to the key switch, and using the second switch for whatever else, now would there?

Author:  Johndeere87 [ Mon Nov 14, 2016 11:58 pm ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Done. Added one more wire for an additional accessory and soldered the volt meter power wire to the primary wire. I will power the switch board with the key switch, and use relays on the accessories to handle the additional load placed on the primary wire. Was it just me, or did anyone else have to trim behind the dash in order to install this kit? Regardless, it wasn't enough trimming to make anything flimsy, and looks great.

Author:  weeks101 [ Tue Nov 15, 2016 11:26 am ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Hmm, no trimming should be required.

Author:  Johndeere87 [ Wed Nov 16, 2016 10:43 am ]
Post subject:  Re: SasquatchParts.com • ​Jeep Liberty VM 2.8L CRD Parts ​​

Hopefully I'm not crazy, and did it for no reason, lol. Maybe someone else that has done it will comfirm. The plug for the circuit board, and the middle plug were interfering with the install. Even if it does need trimming, I'd buy it again. Very clean looking

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/