LOST JEEPS :: View topic - SasquatchParts.com • Parts for your Jeep Liberty 2.8L CRD

Sasquatch Crew are amazing to buy from. FAST comms to any questions i had, and FAST shipping.
ordered a tshirt, 10 decals, Carter lift pump and the new custom made wiring harness for it.
bad-ass crew.
thanks for the great shopping experience.

From up north in BC Canada :pepper:

Does the battery tray secure a group 34 battery? I've got a webasto on the way, but it's going to be a while before I can justify replacing a well working battery.

I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop.

GordnadoCRD wrote:

I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop.

We do now include significantly longer bolts to hopefully accommodate a wider range of height variations.

weeks101 wrote:

GordnadoCRD wrote:

I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop.

We do now include significantly longer bolts to hopefully accommodate a wider range of height variations.

See what I mean about this guy!
None of this "domino effect" train of troubleshooting after installing his stuff.
He's just like Prego. Whatever you need.. "It's in there"

GordnadoCRD wrote:

I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop.

We do now include significantly longer bolts to hopefully accommodate a wider range of height variations.

Just wanted to thank Seth at sasquatch. I needed the lift pump and harness ASAP and he made it happen. Appreciate it I will be ordering more parts

Author:	Bushman5 [ Fri Jun 30, 2017 11:11 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
Sasquatch Crew are amazing to buy from. FAST comms to any questions i had, and FAST shipping. ordered a tshirt, 10 decals, Carter lift pump and the new custom made wiring harness for it. bad-ass crew. thanks for the great shopping experience. From up north in BC Canada

Author:	WWDiesel [ Sat Jul 01, 2017 11:50 am ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
Bushman5 wrote: Sasquatch Crew are amazing to buy from. FAST comms to any questions i had, and FAST shipping. ordered a tshirt, 10 decals, Carter lift pump and the new custom made wiring harness for it. bad-ass crew. thanks for the great shopping experience. From up north in BC Canada I agree, Great people with great products to do business with!

Author:	DieselJeepLuvr [ Mon Jul 24, 2017 8:55 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
Is there a EGR delete kit for the 07-08 Grand Cherokee CRD? I just bought one and it looks like it'd improve inlet air flow if gone.

Author:	aaronguy2k1 [ Mon Nov 06, 2017 7:56 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
Does the battery tray secure a group 34 battery? I've got a webasto on the way, but it's going to be a while before I can justify replacing a well working battery.

Author:	WWDiesel [ Mon Nov 06, 2017 9:00 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
aaronguy2k1 wrote: Does the battery tray secure a group 34 battery? I've got a webasto on the way, but it's going to be a while before I can justify replacing a well working battery. Yes the Sasquatch battery tray will fit and function perfectly with a group 34 battery; I installed it and used it with my group 34 battery in the Sasquatch mount until such time I purchased and installed a larger group 65 Northstar AGM. I did not use the metal top hold down plate that came with the mount on the group 34 as I was very concerned about it being to close to the positive (+) terminal. I simply secured it with some rubber bungee cords temporarily...

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

SasquatchParts.com • Parts for your Jeep Liberty 2.8L CRD http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82759	Page 2 of 2

Author:	GordnadoCRD [ Tue Nov 07, 2017 12:02 am ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
I also temporarily had a grp 34 mounted, but I pushed it all the way towards the engine, and mounted the cover with the 2 holes closest the engine (of the tray) matched with the two holes closest the fender (of the cover) There were only 2 bolts holding it on, but it worked until I got the group 65. When you get the grp 65 know in advance that they vary in height. The Odyssey AGM batteries are the perfect height it was designed for, so compare that when you shop. I installed a grp 65 that is not AGM. I had to fabricate spacer blocks so the cover would not be deformed from the gas valves on top. I had to use bolts 1" longer than the ones supplied because of that. This is no fault of the Battery Tray. The problems were caused by my going cheap on the battery. Rt click, select view image if they don't show. I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop.

Author:	weeks101 [ Tue Nov 07, 2017 12:16 am ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
GordnadoCRD wrote: I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop. We do now include significantly longer bolts to hopefully accommodate a wider range of height variations.

Author:	GordnadoCRD [ Tue Nov 07, 2017 12:28 am ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
weeks101 wrote: GordnadoCRD wrote: I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop. We do now include significantly longer bolts to hopefully accommodate a wider range of height variations. See what I mean about this guy! None of this "domino effect" train of troubleshooting after installing his stuff. He's just like Prego. Whatever you need.. "It's in there"

Author:	weeks101 [ Tue Nov 07, 2017 3:15 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
GordnadoCRD wrote: weeks101 wrote: GordnadoCRD wrote: I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop. We do now include significantly longer bolts to hopefully accommodate a wider range of height variations. See what I mean about this guy! None of this "domino effect" train of troubleshooting after installing his stuff. He's just like Prego. Whatever you need.. "It's in there" lol!

Author:	WWDiesel [ Tue Nov 07, 2017 9:37 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
weeks101 wrote: GordnadoCRD wrote: I believe WWDiesel also had to use longer bolts because of the greater height of the Northstar line. Just be aware this may be a possibility if you don't compare battery height when you shop. We do now include significantly longer bolts to hopefully accommodate a wider range of height variations. I ended up installing longer 6mm bolts from the bottom with nuts on the bottom part as spacers (first picture), then installed the top plate hold down with a thin piece of rubber tool drawer liner on top of the battery to secure everything in place. Maybe the Northstar AGM is a little taller, just not sure! These are the install pictures: Pre top plate: Post top plate:

Author:	GordnadoCRD [ Wed Nov 08, 2017 2:32 am ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
Why the tin foil wrapping around the battery? Does that insulate if from the electromagnetic supermicrowaves of the shadow government's secret mind control device? I'm sure THEY would love to scramble the logic circuits of these little Italian diesels...

Author:	joe_ [ Wed May 23, 2018 7:05 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
That's to reflect engine heat away from the battery to help keep it from getting too warm.

Author:	GordnadoCRD [ Wed May 23, 2018 7:47 pm ]
Post subject:	Re: SasquatchParts.com • Jeep Liberty VM 2.8L CRD Parts
Ah I just insulated around the engine to keep heat from getting to everything else. Battery, control modules, wiring, etc.

Author:	Git it Garage [ Wed Jan 15, 2020 11:41 am ]
Post subject:	Re: SasquatchParts.com • Parts for your Jeep Liberty 2.8L C
In This video we show you how to install the Jeep Liberty CRD Group 65 AGM Battery Tray & Webasto Mount by Sasquatchparts.com. https://youtu.be/xo6AJTtJxAo

Page 2 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	Bowtiecrazz [ Sat Jan 07, 2023 2:07 pm ]
Post subject:	Re: SasquatchParts.com • Parts for your Jeep Liberty 2.8L C
Just wanted to thank Seth at sasquatch. I needed the lift pump and harness ASAP and he made it happen. Appreciate it I will be ordering more parts

Author:	weeks101 [ Tue Jan 10, 2023 12:04 am ]
Post subject:	Re: SasquatchParts.com • Parts for your Jeep Liberty 2.8L C
Bowtiecrazz wrote: Just wanted to thank Seth at sasquatch. I needed the lift pump and harness ASAP and he made it happen. Appreciate it I will be ordering more parts We appreciate doing business with you, Bowtiecrazz!

Author:	Lancer [ Mon May 01, 2023 2:47 pm ]
Post subject:	Re: SasquatchParts.com • Parts for your Jeep Liberty 2.8L C
I've been doing business with Sasquatch for years. I live in England and I have always found the service and items supplied to be first class.