| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Where does the water pump o-ring go? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82779 |
Page 1 of 1 |
| Author: | pjigar [ Wed Aug 05, 2015 9:58 pm ] |
| Post subject: | Where does the water pump o-ring go? |
I am in the middle of "fix the been counter engineering" operation with my libby. I ordered water pump front half among other things from idparts.com. The water pump half came with a gasket (big o-ring) and a small o-ring. I figured that the big o-ring or gasket goes in the recess on the water pump half perimeter to form a seal between two halves. But I can't figure out where the smaller o-ring go? You can see both o-rings in the idparts product page. Does anyone have an adea? Part page FYI: http://www.idparts.com/water-pump-brass ... -3612.html |
|
| Author: | geordi [ Wed Aug 05, 2015 11:45 pm ] |
| Post subject: | Re: Where does the water pump o-ring go? |
I believe the smaller O-ring is the block seal for the back half if (for some reason) you remove the whole thing from the engine bay. I never use it. |
|
| Author: | pjigar [ Thu Aug 06, 2015 8:51 am ] |
| Post subject: | Re: Where does the water pump o-ring go? |
geordi wrote: I believe the smaller O-ring is the block seal for the back half if (for some reason) you remove the whole thing from the engine bay. I never use it. Thanks. That makes sense. |
|
| Author: | Sir Sam [ Thu Aug 06, 2015 1:24 pm ] |
| Post subject: | Re: Where does the water pump o-ring go? |
I have dozens leftover here, free gaskets for anyone to pickup. Never use em. |
|
| Author: | papaindigo [ Thu Aug 06, 2015 1:43 pm ] |
| Post subject: | Re: Where does the water pump o-ring go? |
Yep, see 06 Parts Figure 7-230 PN 05159019AA pump to block "O" ring. If you don't have parts fiche and FSMs get copies from http://colorado4wheel.com/manuals/Jeep/KJ/ Parts manuals are often better than FSMs at showing how things go together. |
|
| Author: | Sir Sam [ Thu Aug 06, 2015 3:20 pm ] |
| Post subject: | Re: Where does the water pump o-ring go? |
papaindigo wrote: Yep, see 06 Parts Figure 7-230 PN 05159019AA pump to block "O" ring. If you don't have parts fiche and FSMs get copies from http://colorado4wheel.com/manuals/Jeep/KJ/ Parts manuals are often better than FSMs at showing how things go together. The FSM helps those who help themselves. |
|
| Author: | pjigar [ Mon Aug 17, 2015 12:34 pm ] |
| Post subject: | Re: Where does the water pump o-ring go? |
Sir Sam wrote: The FSM helps those who help themselves. Fair comment! I went through FSM but not the parts manual. I will refer both next time. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|