| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| TORQUE PRO CUSTOM PIDS http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=83079 |
Page 1 of 1 |
| Author: | tedder [ Thu Sep 17, 2015 7:47 pm ] |
| Post subject: | TORQUE PRO CUSTOM PIDS |
Anyone have the custom PID numbers for the Torque Pro for our CRD's? Or can tell me where they can be found. Specifically the boost pressure, rail pressure and or MAP. I've been trying to find them and have read here where people are using them but no specifics. Any help would be greatly appreciated otherwise the Torque Pro APP is useless without them. Thanks, John |
|
| Author: | dirtmover [ Fri Sep 18, 2015 9:36 am ] |
| Post subject: | Re: TORQUE PRO CUSTOM PIDS |
Rail pressure and boost/MAP are available as standard gauges. If you install the torque scan add on it also shows the pids. |
|
| Author: | flash7210 [ Fri Sep 18, 2015 10:32 am ] |
| Post subject: | Re: TORQUE PRO CUSTOM PIDS |
You have to have the OBD adapter plugged in and the app connected to see all the available gauges/sensors that can be used. When you add a new gauge, all the available sensors will be highlighted in bright green. Using my tablet I can view: speedometer tachometer MAP/boost Intake Air Temperature coolant temperature fuel rail pressure battery voltage |
|
| Author: | mass-hole [ Fri Sep 18, 2015 12:20 pm ] |
| Post subject: | Re: TORQUE PRO CUSTOM PIDS |
Make sure you are using the proper OBD profile for the Jeep. In my experience, you must go into the vehicle profile and tell it what to use otherwise it defaults to an incorrect one and you only get RPM. I believe it is ISO9141-2 With that said, the connection to the ECU is iffy at best. Mine drops connection pretty much every time i use it, and that is with a higher and OBDLink LX and a cheap chinese BT adapter. |
|
| Author: | tedder [ Fri Sep 18, 2015 12:30 pm ] |
| Post subject: | Re: TORQUE PRO CUSTOM PIDS |
Thanks all, I will give your recommendations a try this weekend and let you know how it worked. I'm clearly in the default mode on the Torque Pro because all I get is RPM and all the things a phone can do in green. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|