| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Valve cover cam pin plug http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=83165 |
Page 1 of 1 |
| Author: | joelukex4 [ Thu Oct 01, 2015 9:57 am ] |
| Post subject: | Valve cover cam pin plug |
Does anyone know the thread size for the cam pin plugs in the valve cover. Ended up loosing one doing the timing belt change and can't find a part number for it on any of the Mopar sites. |
|
| Author: | flash7210 [ Thu Oct 01, 2015 10:14 am ] |
| Post subject: | Re: Valve cover cam pin plug |
I have no clue. But you may be able to take the other plug to a hardware store, find a small bolt that is the same thread size, cut it shorter if you have to, and seal the threads with some blue locktite or nail polish. It doesn't have to be in there tight. It just has to keep oil from leaking out. |
|
| Author: | bugnout [ Thu Oct 01, 2015 10:21 am ] |
| Post subject: | Re: Valve cover cam pin plug |
Here is a source, just need to figure out what size it is. http://www.zoro.com/parker-hollow-hex-plug-m10-x-1-metric-vsti10x1edcf/i/G5007581/?gclid=CNHZzPq7ocgCFeOD2wodR0AJ9w&gclsrc=aw.ds |
|
| Author: | pjigar [ Thu Oct 01, 2015 10:29 am ] |
| Post subject: | Re: Valve cover cam pin plug |
Mopar part number: 05066787AA |
|
| Author: | dirtmover [ Thu Oct 01, 2015 12:43 pm ] |
| Post subject: | Re: Valve cover cam pin plug |
They're M10x1 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|