| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tb tensioner bolt torque http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=83237 |
Page 1 of 1 |
| Author: | Efren_Hinojosa [ Sun Oct 11, 2015 4:02 pm ] |
| Post subject: | Tb tensioner bolt torque |
I just changed the belt and in the process of getting it back together. I saw the bolt torque should be 22 ft. Lbs and i saw in this forum someone say 28 ft lbs. What is the correct torque? i torqued it to 22 ft lbs but now reading abouy 28 ft lbs has me thinking if i should open it up torque it 6ft lbs more? Sent from my SAMSUNG-SM-N900A using Tapatalk |
|
| Author: | Mountainman [ Sun Oct 11, 2015 4:21 pm ] |
| Post subject: | Re: Tb tensioner bolt torque |
Efren_Hinojosa wrote: I just changed the belt and in the process of getting it back together. I saw the bolt torque should be 22 ft. Lbs and i saw in this forum someone say 28 ft lbs. What is the correct torque? i torqued it to 22 ft lbs but now reading abouy 28 ft lbs has me thinking if i should open it up torque it 6ft lbs more? Sent from my SAMSUNG-SM-N900A using Tapatalk I do 30 Newton Meters, 22 Foot Pounds should be good. The 28 you saw was probably NM |
|
| Author: | papaindigo [ Sun Oct 11, 2015 4:26 pm ] |
| Post subject: | Re: Tb tensioner bolt torque |
30N-m/22 ft. lbs - be kind of careful here as several I've seen have a helicoil installed in that threaded hole from the factory. |
|
| Author: | Efren_Hinojosa [ Sun Oct 11, 2015 4:30 pm ] |
| Post subject: | Re: Tb tensioner bolt torque |
Thank you guys. I already have it almost completed i would hate to tear it down to retorque. Sent from my SAMSUNG-SM-N900A using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|