This morning after starting up switched the fan on only to find it only worked on full power number (4) slower speeds did not work, this has never happened before is the problem likely to be in the switch or the fan motor?

_________________
2005 2.8 Cherokee auto love it
Trying to enjoy a fine crafted 4x4
Enjoy this Forum

Resistor that controls fan speed is dying. Copied from an old forum post "Yesterday speeds 1 and 2 stopped working on the cabin heater/AC fan on my 06 CRD and I found this thread. I got mine at Advanced Autoparts and it's ceramic covered as mentioned. The brand is BWD and part number is RU1040 or Standard Motor Products (SMP) RU347 and is listed for a 2001-2004 Chrysler Sebring. To get to the resistor open the glove box then press inward on the latch arms on the left and right side to let it drop down further. The resistor is right there held on by two 5/16 hex head screws. You need to pull out on the red tab about 1/4" to push the release and it required some pressure to get the red tap to pull out." The suggested replacement is heavier duty than stock OEM.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Ordered the part from ebay, thanks for the help.

_________________
2005 2.8 Cherokee auto love it
Trying to enjoy a fine crafted 4x4
Enjoy this Forum