| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear Axle http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=83309 |
Page 1 of 1 |
| Author: | yakman4 [ Thu Oct 22, 2015 6:59 pm ] |
| Post subject: | Rear Axle |
Did any 06 Liberty 4x4 CRD's come with the corp 8.25 or did they all come with the Dana. |
|
| Author: | olypopper [ Thu Oct 22, 2015 7:08 pm ] |
| Post subject: | Re: Rear Axle |
My 05 has a corporate............not sure if they changed in 06 or not. |
|
| Author: | JeepMorrison [ Thu Oct 22, 2015 10:19 pm ] |
| Post subject: | Re: Rear Axle |
yakman4 wrote: Did any 06 Liberty 4x4 CRD's come with the corp 8.25 or did they all come with the Dana. Actually both lol......8.25 in the rear, d30 in the front. The d35 was in EARLY 2002. Sent from my SM-N900P using Tapatalk |
|
| Author: | thermorex [ Thu Oct 22, 2015 11:16 pm ] |
| Post subject: | Re: Rear Axle |
As I know, for crd, 4x4kayak is correct, 8 and 1/4 rear and Dana 30 front. |
|
| Author: | mass-hole [ Fri Oct 23, 2015 11:08 am ] |
| Post subject: | Re: Rear Axle |
4x4kayak2112 wrote: yakman4 wrote: Did any 06 Liberty 4x4 CRD's come with the corp 8.25 or did they all come with the Dana. Actually both lol......8.25 in the rear, d30 in the front. The d35 was in EARLY 2002. Sent from my SM-N900P using Tapatalk Was the D35 in the front or rear? |
|
| Author: | JeepMorrison [ Fri Oct 23, 2015 4:34 pm ] |
| Post subject: | Re: Rear Axle |
mass-hole wrote: 4x4kayak2112 wrote: yakman4 wrote: Did any 06 Liberty 4x4 CRD's come with the corp 8.25 or did they all come with the Dana. Actually both lol......8.25 in the rear, d30 in the front. The d35 was in EARLY 2002. Sent from my SM-N900P using Tapatalk Was the D35 in the front or rear? Real Early 2002 had a d35 in the rear, but honestly I have only seen three in my entire life. But you have a CRD so no worries there Sent from my SM-N900P using Tapatalk |
|
| Author: | yakman4 [ Fri Oct 23, 2015 6:39 pm ] |
| Post subject: | Re: Rear Axle |
Thanks for all the replies. I was trying to find axle shafts for the rear with the tone rings for the abs. I ordered the set for the the 8 1/4 because I told these were correct. So ended getting screwed out of the shipping. All I could find was OEM nobody makes aftermarket at rock auto for $255 each. |
|
| Author: | flash7210 [ Fri Oct 23, 2015 7:14 pm ] |
| Post subject: | Re: Rear Axle |
Just outta curiosity, why do you need new axle shafts? |
|
| Author: | yakman4 [ Fri Oct 23, 2015 7:45 pm ] |
| Post subject: | Re: Rear Axle |
My teenager lost control in the rain and wrecked went sideways up a 6 " curb busted the wheel and bent the axle shaft and caused 5K in body damage. But Jeep is still going. |
|
| Author: | flash7210 [ Fri Oct 23, 2015 7:55 pm ] |
| Post subject: | Re: Rear Axle |
Thanks. I understand. I was afraid that you somehow wore them out. Local junkyard would have been the first place I would have looked. Thats where my dad took me when I was a teenager. |
|
| Author: | jws84_02 [ Fri Oct 23, 2015 11:05 pm ] |
| Post subject: | Re: Rear Axle |
What parts do you all need. I'm parting one out and have plenty of parts available |
|
| Author: | thermorex [ Fri Oct 23, 2015 11:19 pm ] |
| Post subject: | Re: Rear Axle |
yakman4 wrote: Thanks for all the replies. I was trying to find axle shafts for the rear with the tone rings for the abs. I ordered the set for the the 8 1/4 because I told these were correct. So ended getting screwed out of the shipping. All I could find was OEM nobody makes aftermarket at rock auto for $255 each. Did you try randys ring and pinion? I think the site is ringpinion.com. |
|
| Author: | TwoBobsKJ [ Sun Oct 25, 2015 8:32 pm ] |
| Post subject: | Re: Rear Axle |
yakman4 wrote: My teenager lost control in the rain and wrecked went sideways up a 6 " curb busted the wheel and bent the axle shaft and caused 5K in body damage. But Jeep is still going. If you just need an axle shaft they are available at any AutoZone, NAPA, etc. I just bought one from NAPA for $169 that came with the bearing, seal and lugs. Axle replacement is actually pretty straightforward - longest part of the whole repair is pumping in new gear oil... Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|