I've been hearing This clunking noise when I turn or shift to uneven ground. Sometimes at idol there is a vibration in my steering wheel. Could this be engine motor mounts? For what its worth the UCA and lower ball joints are new thanks

Could be the nut holding the motor mounts are loose. I had the clunk because of this, but do not recall steering wheel vibration?

_________________
2006 LTD Bright Silver loaded with all the needed mods, CCV intact.
Proudly supporting CRD vendors, and their development of quality parts and accessories.
Equipped with HDS thermostat, plenty of heat, faster warm-ups, increased fuel mileage.

Finally fixed. It was 2 bad motor mounts, thanks

Glad you got it fixed. Mine has the same issue. I replaced both motor mounts and still had some *clunking*. Found out it was the upper strut spring mounting plate. Bushings are toast. Getting replaced in a couple days.

More info here by *boss*: viewtopic.php?f=5&t=79236&start=20

_________________
Marty

'05 CRD, GDE tune(s), JBA stuff, OME, Weeks Stage I & II, "Provent"(custom) +++