Hello Fellas,

What is the wheel stud thread pitch on our CRD Liberty?

Something isn't right.

I'm in a nice warm shop today(11* outside), got 20 new SS lug nuts from Gorilla, and they don't seem to fit. Wanted to get this done today because the nut covers are breaking off from the nuts and I really don't want to get stuck on the road because I can't get a wheel lug nut off.

Gorilla says 12MM x 1.50 for our vehicle
Summit says 1/2 in. x 20
Owners manual says Jack.

Can one of you fellas please let me know ASAP?

Much Appreciated.

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

1/2" x20 tpi and the hex size (where the wrench fits) is 3/4" They are called acorn nuts and you can get a 20 piece set for about $20 on e-bay

I bought 3 sets. One for each jeep and another for my camper

No more rusty nuts with the cheap caps falling off

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)

Are the CRDs any different than the rest of us? If not then 1/2 RH 20. At least that's what the McGard kit I bought was. They fit fine.

_________________
Ian

2005 KJ Renegade, ARB'd, OME'd, Rancho'd, Warn'd, skid'd, JBA 4.5s, Cragar Soft 8s, GY MTs 31x10.5x15, and dirty, can't forget the dirty.

No Exactly the same as what were on my 89, 96, 99 and now my 2000 XJ's

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)

Thanks fellas. Yes, I guess it is 1/2 x 20.

Again, call em up, pack it up, return it, re-order, try again.



There's no such thing as a bolt-on!

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

Does anybody have links to the appropriate solid stainless lug nuts for our OEM wheels?

_________________
2006 Jeep Liberty CRD 142,000 miles New engine 2-2014, Green Eco tune, FS2500 bypass filter Weeks elbow, European Torque converter, brakes front UCA's wheel bearing and front hubs. Front hitch OEM lift pump
98 K2500 Suburban 6.5td
96 K1500 " 6.5td
95 2 door Tahoe 6.5td
94 K3500 cc srw 5 speed 6.5td
91 International Model 6 speed spicer 4700

Amazon.

Sent from my SM-N900P using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.