Good Afternoon all!

I am just trying to get a little more clearance as we are out in the boonies and some of the depressions in our dirt roads are big enough to swallow a Libby.

Just looking for a 2"-3" lift/leveling kit. Nothing crazy. I have a truck for that...

Most of what I find has a diesel disclaimer attached.

What have you all tried and what do you like?

Thanks!

_________________
El Jefe de Biosmell,
at your service!

2005 Black CRD Limited (18,000) now 130000 miles, GDE Eco-tune, Geordi timing belt job, Weeks delete and ARP studs. New rockers, head gasket, water pump and Etecno 7v plugs while we were in there. 100% Biodiesel 100% of the time!
2001 Dodge 24 valve Forest Green, 6" lift, full Banks Power Kit.

This place will have everything you need:
https://jeepinbyal.com

_________________
U.S. Army Retired

Weeks101 sells a bunch of stuff at a good price. https://shop.sasquatchparts.com. I got from him an arb bumper plus lights and the lift kit, ome with diesel Springs. I recommend it unless you are willing to replace axles, upper arms, drop the transmission by few inches, etc.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

I am running and ome coil over with hd springs(948), jba top plate spacer, and clevis spacer up front. In the back I have jba 2.5" lift springs, 1 extra ISO, and ome shocks. This puts the Jeep pretty much dead level with an arb bumper on the front. Ride is much better than stock and aside from my jba upper arms making contact with the uca pockets on the downstroke, I have had no issues.

Sent from my Nexus 6 using Tapatalk

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

Whoops, meant to attach these to my other post

Now I can't get the second one to post to show it on flat ground
Sent from my Nexus 6 using Tapatalk

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

Yes - OME suspension, jba top plate spacer, 1 or 2 extra ISOs on the back; you might want to consider the jba link on the back between the boomerang and the diff - stops the bushes and ball joint wearing prematurely.

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

Thanks for posting this, I meant to get it and I forgot...

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

You added some resistors to the led turning lights, didn't you? I find it silly that a bumper worth well over 1000 bucks comes with led turning lights without canbus cimpatible resistors. After installing everything the turning signal relay was blinking like one of the bulbs was out...

Btw, what tire size you have? 245x75x16?

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.