| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 5v or 7v how to tell http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=83845 |
Page 1 of 1 |
| Author: | ChazzRaJ [ Thu Jan 14, 2016 12:47 am ] |
| Post subject: | 5v or 7v how to tell |
My Liberty is throwing an engine code for a bad glow plug. It shouldn't be a big deal to replace, but I don't know if it has the old 5v or the new 7v glow plugs. Is there a simple way to tell so I can be sure that I am ordering the correct part? |
|
| Author: | olypopper [ Thu Jan 14, 2016 2:42 am ] |
| Post subject: | Re: 5v or 7v how to tell |
For the glow plugs, you can simply look at them and there should be a colored ring near the end where the plug slides over it: White = Bosch 7v Ceramics Red= Bosch 5V Steel, Jeep's replacement for the ceramic s No Ring = Etencno Steel The above info is a quote that I copied from a winterizing thread. This information was supplied by Masshole. |
|
| Author: | pjigar [ Thu Jan 14, 2016 7:01 pm ] |
| Post subject: | Re: 5v or 7v how to tell |
Or you can just open it up and check the rim around the threads. It will have voltage written on the rim. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|