Is it possible to just but a new Tensioner pulley for my 2005 Jeep KJ 2.8crd instead of the whole thing with the bracket?

If so anyone know the part number?

serpentine belt tensioner OEM Part No.: - 5072440AC

Pulley Only:
NAPA: 36141 (Bore 17mm x O.D. 76 mm x 22mm width)

https://www.napaonline.com/napa/en/p/NBG36141/NBG36141

Note: Gates and ACDelco use the same 36141 part number...

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Thanks for that
Sorry if this is a silly question but Is a idler pulley the same as a Tensioner pulley?

No, they are a different size and are made out of Thermoplastic whereas the tensioner pulley is made of metal!

Idler pulley size:> (O.D. 70mm x 17mm bore x 31mm width) constructed of thermoplastic (2 required)
Tensioner pulley size:> (Bore 17mm x O.D. 76 mm x 22mm width) constructed of metal (1 required)

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

OK thanks
Its just the link above called it a Idler Pulley

Is this one ok?

http://www.ebay.co.uk/itm/JapKo-129924-Deflection-Guide-Belt-Pulley-Chrysler-Jeep-2-5-2-8-/232172412214?fits=Car+Make%3AJeep%7CPlat_Gen%3AKJ&hash=item360e8ddd36:g:Sn8AAOSwImRYJ1D4

Well it is an Idler Pulley, it is just bolted to the tensioner arm...
Picture looks correct!! Site does not list the pulley's specifications..

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I don't think that P/N and link are for my 2005 Jeep KJ 2.8CRD

as I have just been outside to measure the Diameter of my tensioner pulley and it 70mm x 26mm