| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Which Transgo Kit?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=84339 |
Page 1 of 1 |
| Author: | bradleyj [ Thu Mar 31, 2016 7:50 am ] |
| Post subject: | Which Transgo Kit?? |
I'm seeing two different Transgo shift kits available for the 545RFE: SK 45RFE 45RFE-HD2 What's the difference between the two and which one do I need for my CRD? |
|
| Author: | flash7210 [ Thu Mar 31, 2016 8:39 am ] |
| Post subject: | Re: Which Transgo Kit?? |
I'd get the HD2. It comes with more springs. You dont need the resistor. |
|
| Author: | Hexus [ Fri Apr 01, 2016 2:54 pm ] |
| Post subject: | Re: Which Transgo Kit?? |
See my signature. |
|
| Author: | thermorex [ Fri Apr 01, 2016 3:45 pm ] |
| Post subject: | Re: Which Transgo Kit?? |
Btw, how involving is to install it? The instructions are a bit brief. |
|
| Author: | Mike92104 [ Fri Apr 01, 2016 3:56 pm ] |
| Post subject: | Re: Which Transgo Kit?? |
https://www.youtube.com/watch?v=vaUJ18obqcA https://www.youtube.com/watch?v=1_oqVqaizoE |
|
| Author: | thermorex [ Sat Apr 02, 2016 2:07 am ] |
| Post subject: | Re: Which Transgo Kit?? |
Mike, you're the man! Thanks a lot! |
|
| Author: | xhizzous [ Sun Apr 03, 2016 9:07 am ] |
| Post subject: | Re: Which Transgo Kit?? |
Pull pan, pull filters .. pull valve body and take it apart. you wont be able to do the trans pump mod or use the large snap ring without pulling the trans so you can get into the front drum. If you do, make sure you keep everything in order and count the snap rings and such so you can replace the right one. If you are just using the springs it should be a cakewalk. You will also need to have a dealer or someone with the right tool to a "relearn" on the trans to make it learn how to shift properly again. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|