It is currently Thu Mar 28, 2024 7:26 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: need rocker arm clip
PostPosted: Wed Jun 22, 2016 7:57 am 
Offline
LOST Member

Joined: Tue Jun 01, 2010 8:47 am
Posts: 191
I'm in need of 1 of the clips that hold the ball of the "lifter" to the rocker arm. Any idea on where i can locate one? I tore my head off about 1-2 months ago and just had it gone over at the shop and all is well, I'm in the process of gathering a parts list to reassemble so i can order my studs and gaskets and most likely my timing belt stuff while its apart since its due in 50k miles.

I broke one of the clips pulling the old rockers, THe rockers are fine and show no noticable wear (due i think to the 5-40 oil and not the 0-40) But hate to put it together without it, and don't want to buy a whole set just for that reason.

_________________
06 crd, straight pipe, EHM,
99 f250 7.3l powerstroke sled puller, All kinds of goodies.
79 2.3 turbo mustang hatch
88 5.0 vert (blown, but soon to be TT stroker)
66 f100 project.
01 cbr 929rr


Top
 Profile  
 
 Post subject: Re: need rocker arm clip
PostPosted: Wed Jun 22, 2016 8:55 am 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4962
Location: Green Cove Springs FL
Try IDparts or eBay. You might be able to purchase a single rocker.

You can also try contacting Mountainman or Geordi. They might have some spare parts left over.

_________________
U.S. Army Retired


Top
 Profile  
 
 Post subject: Re: need rocker arm clip
PostPosted: Wed Jun 22, 2016 11:28 am 
Offline
LOST Member

Joined: Tue Jun 01, 2010 8:47 am
Posts: 191
Thanks. I will try to contact them and IDparts, as thats where i am ordering some stuff from

_________________
06 crd, straight pipe, EHM,
99 f250 7.3l powerstroke sled puller, All kinds of goodies.
79 2.3 turbo mustang hatch
88 5.0 vert (blown, but soon to be TT stroker)
66 f100 project.
01 cbr 929rr


Top
 Profile  
 
 Post subject: Re: need rocker arm clip
PostPosted: Wed Jun 22, 2016 12:46 pm 
Offline
LOST Junkie

Joined: Sun May 01, 2011 2:27 pm
Posts: 833
Location: Milford, IL
I have many good used complete rockers. Pm me. I'll ship just one to you

_________________
2005 Crd Silver Limited- arps, rockers, 7v etechno's, egr deleted, v6 airbox, metal cac's. Yeti's stage 2 tune. Euro TC, Ram tcm, pml transmission pan, facet lift pump


Top
 Profile  
 
 Post subject: Re: need rocker arm clip
PostPosted: Wed Jun 22, 2016 5:03 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 03, 2007 2:07 am
Posts: 6217
Location: Colorado Baby!
I have a good number around from trashed rockers if no one else comes through, I can get some going your way friday or saturday if you need it.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic


Top
 Profile  
 
 Post subject: Re: need rocker arm clip
PostPosted: Wed Jun 22, 2016 10:29 pm 
Offline
LOST Member

Joined: Tue Jun 01, 2010 8:47 am
Posts: 191
jws84_02 Helped me out everyone. Thanks for the reply's and the help.

_________________
06 crd, straight pipe, EHM,
99 f250 7.3l powerstroke sled puller, All kinds of goodies.
79 2.3 turbo mustang hatch
88 5.0 vert (blown, but soon to be TT stroker)
66 f100 project.
01 cbr 929rr


Top
 Profile  
 
 Post subject: Re: need rocker arm clip
PostPosted: Wed Jun 22, 2016 10:54 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 06, 2007 9:51 pm
Posts: 6297
Location: Somewhere between Heaven and Hell... But it is really hot here on Earth...
Yep, I got your PM, and I have a couple boxes of them too.

I believe that the new rockers are an upgraded design, so I'm not really in the mindset of re-using old rockers, so these are just laying around and I haven't gotten rid of them yet.

I'm about to head out on another CRD trip though so you may get faster service from one of the guys above.

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 125 CRDs currently driving with my timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com