LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Oil cooler studs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85037 |
Page 1 of 1 |
Author: | JDaPP [ Fri Jul 29, 2016 9:51 pm ] |
Post subject: | Oil cooler studs |
As part of my working on head, decided to replace oil cooler+gasket. 3 of the studs need to be replaced. Do I have to use studs or could bolts be used instead? Just trying to understand the stud use. Thanks |
Author: | JDaPP [ Sat Jul 30, 2016 5:02 pm ] |
Post subject: | Re: Oil cooler studs |
How tight did you torque the nuts down? Service manual talks about 47.1 N-m or 35 ft-lbs but that seems more than it can handle. |
Author: | Mike92104 [ Sat Jul 30, 2016 5:30 pm ] |
Post subject: | Re: Oil cooler studs |
JDaPP wrote: How tight did you torque the nuts down? Service manual talks about 47.1 N-m or 35 ft-lbs but that seems more than it can handle. It is too much. I broke one. We replaced it with a bolt. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |