LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Source for return fitting atop fuel injector? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85068 |
Page 1 of 1 |
Author: | NapaBavarian [ Fri Aug 05, 2016 9:21 pm ] |
Post subject: | Source for return fitting atop fuel injector? |
The only thing I found was an entire new fuel return line for $52 and I have to wait a week, buggar. This must cross over to other comonrail diesels, the local O'Riley wasn't much help, I'm not sure he even understood what I was looking for. |
Author: | flash7210 [ Fri Aug 05, 2016 9:36 pm ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
Im pretty sure that chevy duramax engines use the same type of return lines. |
Author: | NapaBavarian [ Fri Aug 05, 2016 10:33 pm ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
Thanks, 2004.5-2010 works, I had to go find it for them at O'Riley, the better parts houses close early. EBay has it for $22 but I want it NOW |
Author: | Sir Sam [ Sat Aug 06, 2016 10:34 am ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
Good find, I've broken too many of those little buggars over the years. Does it come as a kit or an individual tip? |
Author: | NapaBavarian [ Sat Aug 06, 2016 11:23 am ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
It comes as a kit for one side of the duramax, I'll pick one up today. |
Author: | WWDiesel [ Sat Aug 06, 2016 12:18 pm ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
NapaBavarian wrote: It comes as a kit for one side of the duramax, I'll pick one up today. Are you getting the right or left side??? Need to know for future reference... ![]() Dorman Part Numbers: Part # 904-122 (Right Side) Part # 904-123 (Left Side) |
Author: | NapaBavarian [ Sat Aug 06, 2016 2:17 pm ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
http://m.oreillyauto.com/h5/r/oap/site/ ... &ppt=C0024 That's what I ordered, make your own. |
Author: | NapaBavarian [ Sat Aug 06, 2016 3:08 pm ] |
Post subject: | Re: Source for return fitting atop fuel injector? |
https://www.google.com/search?redir_esc ... line%20kit Take your pick |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |