LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Our CRD specific Hub/Bearing unit? - Sensor Plug attached?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85181		 Page 1 of 1
Author:  Infinite_Karma [ Sat Aug 27, 2016 5:55 pm ]
Post subject:  Our CRD specific Hub/Bearing unit? - Sensor Plug attached?
Hey y'all,

I have my 05 KJ CRD Limited (which has ABS, Anti-lock Braking System) on jack stands, and I'm in the process of doing the replacement of my front Hub-bearing-units. I have held-off installing them due to a concern about the new unit I received: upon unwrapping it, I found that it has no sensor wire or plug attached to it. DOH! :banghead:

Listed on Amazon, I purchased these Timkens https://www.amazon.com/gp/product/B000BZ53U6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1, it showed that units had the sensor plug all attached and contained, like this one:
Image

Sadly though, when the ones ordered arrived, they didn't have any sensor cord pack attached to it like the photo above, nor any sensor wire or outlet at all. I guess I ordered the Non-ABS version on accident. Dang those inaccuracy photos! :furious:

Anyone know where I might be able to get the ABS Sensor versions on Amazon or somewhere else, ideally a high-quality and reputable brand (Timken or the like).

Any part numbers available?

Thanks in advance!

Sarma
Author:  Infinite_Karma [ Sat Aug 27, 2016 6:03 pm ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
I found this site that lists many different Hub/Bearing units, and they differentiate between ABS and Non-ABS, so that's good. But I wonder which ones I should get:

http://www.partsgeek.com/catalog/2005/jeep/liberty/driveshaft_-ar-_axle/wheel_hub_assembly.html

The parts numbers listed on the Timken's with ABS and 4WD are as follows:
Image
2005 Jeep Liberty
#18363-05190640
Wheel Bearing and Hub Assembly

Are these the right ones?

Thanks in advance.

Sarma
Author:  Infinite_Karma [ Sat Aug 27, 2016 6:10 pm ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
And is this video overview accurate for our CRDs? Anything different or specific for our CRDs?

https://www.youtube.com/watch?v=Pdr5TtvVzKs
Author:  flash7210 [ Sat Aug 27, 2016 7:54 pm ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
That video looks right to me.
Although I completely removed the knuckle and then removed the hub. Couldn't get a tool on the bolts otherwise.
It's a torx socket for the hub bolts.

Go with whatever bearing you like as long as it's for ABS.
I got mine from Advance auto parts.
Author:  peteyz24 [ Sun Aug 28, 2016 11:02 am ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
rockauto.com. they have many brands to choose from. timken, mopar, skf and others. they timken for abs is $132.79

http://www.rockauto.com/en/catalog/jeep,2005,liberty,2.8l+l4+diesel+turbocharged,1431569,brake/wheel+hub,wheel+bearing+&+hub+assembly,1636
Author:  Infinite_Karma [ Mon Aug 29, 2016 2:09 am ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
Thanks flash7210 and peteyz24 for the reinforcement and the resources.

:)

I ordered some Timkens with ABS cord/sensor-plugs today.
Author:  Sir Sam [ Mon Aug 29, 2016 8:00 am ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
flash7210 wrote:
It's a torx socket for the hub bolts.


Unless my memory is failing me it is a 12 point hex.
Author:  psCRD [ Tue Aug 30, 2016 6:59 am ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
Infinite_Karma wrote:
And is this video overview accurate for our CRDs? Anything different or specific for our CRDs?

https://www.youtube.com/watch?v=Pdr5TtvVzKs


I got mine recently from the company that makes this video, www.a1auto.com. The install was exactly like in the video, and they came in a pair with the abs sensor connected, and ready to plug. I am satisfied with about 1000mi on the new ones. The hub bolts are e-14, or something, I ended up getting a universal-type socket set to get them off, but reverted back to the 12pt, and it worked too. also, you will need a 35mm socket for the axle nut.
Author:  flash7210 [ Tue Aug 30, 2016 7:06 am ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
Sir Sam wrote:
flash7210 wrote:
It's a torx socket for the hub bolts.


Unless my memory is failing me it is a 12 point hex.


Mine were torx.
Had to go back to the parts store to get the special socket.
Author:  Johndeere87 [ Thu Sep 01, 2016 4:20 pm ]
Post subject:  Re: Our CRD specific Hub/Bearing unit? - Sensor Plug attache
My 06 uses a 5mm Allen
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/