Hope I did not make a $ mistake? Replaced my ceramic glow plugs yesterday with the steel Etecno1 7v glow plugs from IDParts.
After installing I noticed the terminal tops do have a little bit of looseness in all 4 of them.
No DTC's tripped when I started engine, and measuring resistance with a Fluke digital meter, they seem to be real close to the OEM ceramics.
Talked to IDParts about this issue and was told a little bit of wobble is normal...
And I was told they have not gotten a response on this issue from the manufacturer...
Time will tell!
All the 7v ceramics looked to be in perfect shape, no cracks or problems found!
Anyone wants them, let me know...
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve