| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Flex (Drive) Plate Bolts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85571 |
Page 1 of 1 |
| Author: | thesameguy [ Fri Nov 11, 2016 4:43 pm ] |
| Post subject: | Flex (Drive) Plate Bolts |
Can anyone confirm the layout and part number of the flex plate bolts? It looks like there are eight into the hub and eight out to the torque converter, but it's tough to tell. The local dealer clearly doesn't know what they're talking about as we got side tracked on the reluctor wheel fasteners, and the guy didn't know what a reluctor wheel was, so.... I can't tell the difference between 05014969AA and 05066753AA in the parts diagram, but it seems like one of those is the right one. I'm looking here: http://www.factorychryslerparts.com/sho ... ct=4305102 |
|
| Author: | Jsamps1345 [ Fri Nov 11, 2016 4:51 pm ] |
| Post subject: | Re: Flex (Drive) Plate Bolts |
05066753AA (24 in diagram) you need 8 and they bolt the hub to the crankshaft. 05014969AA (22 in diagram) you need 8 and they bolt the flexplate to the hub Hope this helps |
|
| Author: | thesameguy [ Fri Nov 11, 2016 4:52 pm ] |
| Post subject: | Re: Flex (Drive) Plate Bolts |
That's what I thought, and that's what I need - thanks! |
|
| Author: | thesameguy [ Fri Nov 11, 2016 5:08 pm ] |
| Post subject: | Re: Flex (Drive) Plate Bolts |
Inexplicably that latter part number is scarce - none in California, 1 or 2 in any given place on the west coast. What the heck? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|