| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What's the part # for 2006 Liberty CRD oil drain washers? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85652 |
Page 1 of 1 |
| Author: | m0sfet [ Fri Nov 25, 2016 10:03 pm ] |
| Post subject: | What's the part # for 2006 Liberty CRD oil drain washers? |
Where can I buy a whole bunch for a reasonable price? Thanks. |
|
| Author: | m0sfet [ Fri Nov 25, 2016 10:08 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
Also, what's the thread pitch of the oil drain plug? Thanks. |
|
| Author: | geordi [ Fri Nov 25, 2016 11:00 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
I just pulled the oil plug today on one of mine and used a fat o-ring that fit for a seal. I'm not a fan of those crush washers. Here is a thread about threads... (heh, so meta) http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=31949 |
|
| Author: | m0sfet [ Sat Nov 26, 2016 3:51 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
Thanks for the link. But it seems like everybody has his own thread pitch in that thread... I can't decide who is right... |
|
| Author: | flash7210 [ Sat Nov 26, 2016 7:40 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
If your drain plug threads are not stripped and have never been rethreaded to a larger size... Get a Fumoto F-102 drain valve. $30.95 on amazon. |
|
| Author: | mass-hole [ Sat Nov 26, 2016 7:49 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
flash7210 wrote: If your drain plug threads are not stripped and have never been rethreaded to a larger size... Get a Fumoto F-102 drain valve. $30.95 on amazon. Why the hell are those so expensive. I mean, I have them on all of my cars, but I cringe Everytime I buy one. Sent from my LG-D850 using Tapatalk |
|
| Author: | geordi [ Sat Nov 26, 2016 11:02 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
Why cringe? You are only buying it once - The thread repair kit is like $18 anyway... This seems like a fair price for never risking the threads again. |
|
| Author: | mass-hole [ Sat Nov 26, 2016 11:04 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
geordi wrote: Why cringe? You are only buying it once - The thread repair kit is like $18 anyway... This seems like a fair price for never risking the threads again. Cause its a ball valve. I bought one for my garden hose for $5. Sent from my LG-D850 using Tapatalk |
|
| Author: | Squeeto [ Sun Nov 27, 2016 8:17 am ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
Copper drain plug washer part# 04720353 The drain plug should be a 3/8 inch British standard parallel pipe thread. That would be 19 threads per inch and an outer diameter of 0.656 inches. |
|
| Author: | Ceearedeedriver [ Sun Nov 27, 2016 10:57 am ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
You only need one. Heat it with a propane torch 'till it's red then cool it down. You can quench it or cool it slowly, copper doesn't mind. I'm still using the original washer for 10 years, ~30 oil changes. |
|
| Author: | PZKW108 [ Sun Nov 27, 2016 6:44 pm ] |
| Post subject: | Re: What's the part # for 2006 Liberty CRD oil drain washers |
Ceearedeedriver wrote: You only need one. Heat it with a propane torch 'till it's red then cool it down. You can quench it or cool it slowly, copper doesn't mind. I'm still using the original washer for 10 years, ~30 oil changes. first time I heard of someone annealing copper washer !!!! but why not !!! I'm surprise you didn't loose it in 10 years 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|