| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tensioner Pulley http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=85810 |
Page 1 of 1 |
| Author: | reeflodge [ Mon Dec 19, 2016 2:46 pm ] |
| Post subject: | Tensioner Pulley |
Is it possible to just but a new Tensioner pulley for my 2005 Jeep KJ 2.8crd instead of the whole thing with the bracket? If so anyone know the part number? |
|
| Author: | WWDiesel [ Mon Dec 19, 2016 3:07 pm ] |
| Post subject: | Re: Tensioner Pulley |
reeflodge wrote: Is it possible to just but a new Tensioner pulley for my 2005 Jeep KJ 2.8crd instead of the whole thing with the bracket? If so anyone know the part number? serpentine belt tensioner OEM Part No.: - 5072440AC Pulley Only: NAPA: 36141 (Bore 17mm x O.D. 76 mm x 22mm width) https://www.napaonline.com/napa/en/p/NBG36141/NBG36141 Note: Gates and ACDelco use the same 36141 part number... 
|
|
| Author: | reeflodge [ Mon Dec 19, 2016 3:15 pm ] |
| Post subject: | Re: Tensioner Pulley |
Thanks for that Sorry if this is a silly question but Is a idler pulley the same as a Tensioner pulley? |
|
| Author: | WWDiesel [ Mon Dec 19, 2016 3:21 pm ] |
| Post subject: | Re: Tensioner Pulley |
reeflodge wrote: Thanks for that Sorry if this is a silly question but Is a idler pulley the same as a Tensioner pulley? No, they are a different size and are made out of Thermoplastic whereas the tensioner pulley is made of metal! Idler pulley size:> (O.D. 70mm x 17mm bore x 31mm width) constructed of thermoplastic (2 required) Tensioner pulley size:> (Bore 17mm x O.D. 76 mm x 22mm width) constructed of metal (1 required) 
|
|
| Author: | reeflodge [ Mon Dec 19, 2016 3:26 pm ] |
| Post subject: | Re: Tensioner Pulley |
OK thanks Its just the link above called it a Idler Pulley Is this one ok? http://www.ebay.co.uk/itm/JapKo-129924-Deflection-Guide-Belt-Pulley-Chrysler-Jeep-2-5-2-8-/232172412214?fits=Car+Make%3AJeep%7CPlat_Gen%3AKJ&hash=item360e8ddd36:g:Sn8AAOSwImRYJ1D4 |
|
| Author: | WWDiesel [ Mon Dec 19, 2016 3:41 pm ] |
| Post subject: | Re: Tensioner Pulley |
reeflodge wrote: OK thanks Its just the link above called it a Idler Pulley Is this one ok? http://www.ebay.co.uk/itm/JapKo-129924-Deflection-Guide-Belt-Pulley-Chrysler-Jeep-2-5-2-8-/232172412214?fits=Car+Make%3AJeep%7CPlat_Gen%3AKJ&hash=item360e8ddd36:g:Sn8AAOSwImRYJ1D4 Well it is an Idler Pulley, it is just bolted to the tensioner arm...  Picture looks correct!! Site does not list the pulley's specifications.. 
|
|
| Author: | reeflodge [ Mon Dec 19, 2016 4:07 pm ] |
| Post subject: | Re: Tensioner Pulley |
I don't think that P/N and link are for my 2005 Jeep KJ 2.8CRD as I have just been outside to measure the Diameter of my tensioner pulley and it 70mm x 26mm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|