where is oil pressure sending located on crd 2.5 '04 model

You can download 03/04 FSM/parts manuals at http://colorado4wheel.com/manuals/Jeep/KJ/ but I suspect it's at the same location as for the 05/06 which is just in front of where the oil filter screws in.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Hi O4 have a steel sump pan and the filter and sender is in a different position to the 2005. Its mounted on the right had side and its screwed into the crankcase into the main oil gallery.

_________________
2005 KJ RENAGADE 2.8 CRD 6 SPEED NP242 FULLTIME 4X4

Thank you guys I will check over the weekend.......I think Lacabrera may be correct. does anyone have pics of where the main oil gallery is?

Figure 8-615 of the 04 Parts fiche at the link I provided may help.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Look up from the underside in the area near the turbo. The oil gallery runs midway up the crankcase and runs the full length of the block.
The oil feed for the turbo is fed from the gallery as well.

_________________
2005 KJ RENAGADE 2.8 CRD 6 SPEED NP242 FULLTIME 4X4