What are you guys using to get live data... ? My snap on solus will read data but only updates like every 30 seconds... I cannot get live or even close to live data... tried my buddies matco scanner same issues maybe a little faster but would lock up all the time would have to back out and restart data stream.? Working on an 06 with over boost under boost codes actuator seems to be working correctly. Have removed turbo cleaned vanes... intake boot between turbo and air box good. No intercooler or hose leaks. Map sensor new. Monitored the vacuum to the actuator with a vacuum gauge and seems to be doing what it's supposed to... really would help to read live data... any help is appreciated!

Android phone/tablet + ELM327 bluetooth adapter + torquepro app

Live data from: tach, speedo, MAP, IAT, coolant temp, fuel rail pressure, and a few others

_________________
U.S. Army Retired

I have a wifi code reader that reads realtime, the DRBIII can also read realtime.

bluetooth elm327 for android is less than $10 for hardware. Wifi elm327 for iphone is about $30.

DRBIII is about $3000.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

Thanks guys the elm 327 and the torque app is helping not as much data options as I would like but it is live data

torque pro should give you more options over the free version.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

It definitely wont show you everything, but most of the major sensors are in there. Make sure you have the appropriate OBD protocol selected under the vehicle profile: ISO 9141-2. If you dont it will default to some other protocol and it will only show you RPM and one or two other things.

IAT, MAP, RPM, Fuel Rail Pressure, MAF, Coolant Temp, Engine Load etc should all be there. I've never been able to see any transmission related sensors but I believe its because our Lib's are some kind of Hybrid communication system where the ECU works in one way and the rest of the computers work in another.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs