So my 2nd ujoint in 2 years has crapped out and all the auto parts websites are showing two different sized joints for our rear shaft on the axle side. One is 3.622" and the other is 3.22"

Does anyone know which is the correct one for the CRD? I assume the different sizes are for 4x4 vs 2x4 or manual vs auto or something.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

No rhyme or reason why you would have one over the other. I picked up a pair of the 3.622 figuring the larger one was for the diesel, but was wrong and had to make another trip to the parts store.

Can't guarantee yours has 3.22, but mine does.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.