| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Correct Rear U-joint on Axle side http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=86220 |
Page 1 of 1 |
| Author: | mass-hole [ Sat Mar 04, 2017 6:14 pm ] |
| Post subject: | Correct Rear U-joint on Axle side |
So my 2nd ujoint in 2 years has crapped out and all the auto parts websites are showing two different sized joints for our rear shaft on the axle side. One is 3.622" and the other is 3.22" Does anyone know which is the correct one for the CRD? I assume the different sizes are for 4x4 vs 2x4 or manual vs auto or something. |
|
| Author: | bugnout [ Sun Mar 05, 2017 10:49 pm ] |
| Post subject: | Re: Correct Rear U-joint on Axle side |
No rhyme or reason why you would have one over the other. I picked up a pair of the 3.622 figuring the larger one was for the diesel, but was wrong and had to make another trip to the parts store. Can't guarantee yours has 3.22, but mine does. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|