No power after 3000 rpm

JHolm · **Joined:** Mon Nov 10, 2014 11:05 am **Posts:** 45

I had my Crd In my garage to install an espar heater and I modified my thermostat. It wasn't driven for about 3 months, and now I have a new problem. It seems to run perfect unless I step on it and go over 3000 rpm. After that it feels restricted and the more I step on it it chocks

Sent from my SM-G920W8 using Tapatalk

flash7210 · **Posted:** Thu Apr 20, 2017 5:52 am

Check the small sensor on the side of the air filter box lid.
Make sure its firmly connected.

flash7210 · **Posted:** Thu Apr 20, 2017 8:18 am

Although I gotta ask, why are you revving it up to or beyond 3000rpm?
All the power is in the 2000-2600 rpm range. (remember, its a diesel engine)

If you are into drag racing, you may want to put your name on the waiting list for the new Dodge Demon.

JHolm · **Joined:** Mon Nov 10, 2014 11:05 am **Posts:** 45

That's exactly what it was thanks. The connector is broken and it fell out. I don't normally rev it past 3000, it probably started around 2500 that I noticed something wasn't right. Do you know if you can buy the connectors for the sensors?

Sent from my SM-G920W8 using Tapatalk

WWDiesel · **Posted:** Thu Apr 20, 2017 11:59 am

JHolm wrote:

That's exactly what it was thanks. The connector is broken and it fell out. I don't normally rev it past 3000, it probably started around 2500 that I noticed something wasn't right. Do you know if you can buy the connectors for the sensors?

Mopar Connection Repair:> http://connectors.dcctools.com/home.htm ... 09DCEC03D2
INTAKE PRESSURE SENSOR (DIESEL) - 3 WAY
Full Repair Kit: 68032284AA
http://connectors.dcctools.com/details. ... orId=34485

They call it "Wiring-Siren (Rhd) - Black", not sure why???
http://www.factorymoparparts.com/oe-mopar/68032284aa

The Repair Connector Store: (some of the GM connectors are the same as Mopar)
http://www.repairconnector.com/categori ... ONNECTORS/

JHolm · **Joined:** Mon Nov 10, 2014 11:05 am **Posts:** 45

WWDiesel wrote:

JHolm wrote:

That's exactly what it was thanks. The connector is broken and it fell out. I don't normally rev it past 3000, it probably started around 2500 that I noticed something wasn't right. Do you know if you can buy the connectors for the sensors?

Mopar Connection Repair:> http://connectors.dcctools.com/home.htm ... 09DCEC03D2
INTAKE PRESSURE SENSOR (DIESEL) - 3 WAY
Full Repair Kit: 68032284AA
http://connectors.dcctools.com/details. ... orId=34485

They call it "Wiring-Siren (Rhd) - Black", not sure why???
http://www.factorymoparparts.com/oe-mopar/68032284aa

The Repair Connector Store: (some of the GM connectors are the same as Mopar)
http://www.repairconnector.com/categori ... ONNECTORS/

Awsome thank you. I'm starting to get too may zip ties holding this thing together.

Sent from my SM-G920W8 using Tapatalk

atikovi · **Joined:** Mon Jan 16, 2012 12:05 pm **Posts:** 19

JHolm wrote:

Do you know if you can buy the connectors for the sensors?

Chrysler part 68032284AA http://connectors.dcctools.com/details.htm?id=38032 Ridiculously priced for $58 at the dealer plus you have to cut and splice it in. Instead, go to a Mercedes dealer or Ebay and order part number 210-540-21-81 for $10 and swap the terminals. Pry out white retainer (you can break it apart), then press in the terminal retaining tang to release it from the connector while pulling the wire out from the bottom. Then stick the terminals into the new connector and press in the retainer.

No power after 3000 rpm

Who is online