| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| No power after 3000 rpm http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=86465 |
Page 1 of 1 |
| Author: | JHolm [ Thu Apr 20, 2017 1:23 am ] |
| Post subject: | No power after 3000 rpm |
I had my Crd In my garage to install an espar heater and I modified my thermostat. It wasn't driven for about 3 months, and now I have a new problem. It seems to run perfect unless I step on it and go over 3000 rpm. After that it feels restricted and the more I step on it it chocks Sent from my SM-G920W8 using Tapatalk |
|
| Author: | flash7210 [ Thu Apr 20, 2017 5:52 am ] |
| Post subject: | Re: No power after 3000 rpm |
Check the small sensor on the side of the air filter box lid. Make sure its firmly connected. |
|
| Author: | flash7210 [ Thu Apr 20, 2017 8:18 am ] |
| Post subject: | Re: No power after 3000 rpm |
Although I gotta ask, why are you revving it up to or beyond 3000rpm? All the power is in the 2000-2600 rpm range. (remember, its a diesel engine) If you are into drag racing, you may want to put your name on the waiting list for the new Dodge Demon. 
|
|
| Author: | JHolm [ Thu Apr 20, 2017 9:51 am ] |
| Post subject: | Re: No power after 3000 rpm |
That's exactly what it was thanks. The connector is broken and it fell out. I don't normally rev it past 3000, it probably started around 2500 that I noticed something wasn't right. Do you know if you can buy the connectors for the sensors? Sent from my SM-G920W8 using Tapatalk |
|
| Author: | WWDiesel [ Thu Apr 20, 2017 11:59 am ] |
| Post subject: | Re: No power after 3000 rpm |
JHolm wrote: That's exactly what it was thanks. The connector is broken and it fell out. I don't normally rev it past 3000, it probably started around 2500 that I noticed something wasn't right. Do you know if you can buy the connectors for the sensors? Mopar Connection Repair:> http://connectors.dcctools.com/home.htm ... 09DCEC03D2 INTAKE PRESSURE SENSOR (DIESEL) - 3 WAY Full Repair Kit: 68032284AA http://connectors.dcctools.com/details. ... orId=34485 They call it "Wiring-Siren (Rhd) - Black", not sure why??? http://www.factorymoparparts.com/oe-mopar/68032284aa The Repair Connector Store: (some of the GM connectors are the same as Mopar) http://www.repairconnector.com/categori ... ONNECTORS/  
|
|
| Author: | JHolm [ Thu Apr 20, 2017 9:13 pm ] |
| Post subject: | Re: No power after 3000 rpm |
WWDiesel wrote: JHolm wrote: That's exactly what it was thanks. The connector is broken and it fell out. I don't normally rev it past 3000, it probably started around 2500 that I noticed something wasn't right. Do you know if you can buy the connectors for the sensors? Mopar Connection Repair:> http://connectors.dcctools.com/home.htm ... 09DCEC03D2 INTAKE PRESSURE SENSOR (DIESEL) - 3 WAY Full Repair Kit: 68032284AA http://connectors.dcctools.com/details. ... orId=34485 They call it "Wiring-Siren (Rhd) - Black", not sure why??? http://www.factorymoparparts.com/oe-mopar/68032284aa The Repair Connector Store: (some of the GM connectors are the same as Mopar) http://www.repairconnector.com/categori ... ONNECTORS/  Awsome thank you. I'm starting to get too may zip ties holding this thing together. Sent from my SM-G920W8 using Tapatalk |
|
| Author: | atikovi [ Thu Aug 15, 2019 1:59 pm ] |
| Post subject: | Re: No power after 3000 rpm |
JHolm wrote: Do you know if you can buy the connectors for the sensors? Chrysler part 68032284AA http://connectors.dcctools.com/details.htm?id=38032 Ridiculously priced for $58 at the dealer plus you have to cut and splice it in. Instead, go to a Mercedes dealer or Ebay and order part number 210-540-21-81 for $10 and swap the terminals. Pry out white retainer (you can break it apart), then press in the terminal retaining tang to release it from the connector while pulling the wire out from the bottom. Then stick the terminals into the new connector and press in the retainer. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|