LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Late model KK seat in KJ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=86525 |
Page 2 of 2 |
Author: | flash7210 [ Thu May 11, 2017 1:56 pm ] |
Post subject: | Re: Late model KK seat in KJ |
Pressure pad and harness removed from KJ seat Inserted into KK seat |
Author: | flash7210 [ Thu May 11, 2017 7:34 pm ] |
Post subject: | Re: Late model KK seat in KJ |
Portion of carpet and insulation removed. Test fitting the KK seat floor mount. |
Author: | flash7210 [ Thu May 11, 2017 7:37 pm ] |
Post subject: | Re: Late model KK seat in KJ |
Seat is in and bolted down. I've now discovered that the seatbelt anchor bolt is a different size |
Author: | flash7210 [ Fri May 12, 2017 11:39 am ] |
Post subject: | Re: Late model KK seat in KJ |
Bolt and M10 washer for seatbelt anchor. 1 bolt + washer for each seat. |
Author: | flash7210 [ Fri May 12, 2017 11:50 am ] |
Post subject: | Re: Late model KK seat in KJ |
Seats successfully installed |
Author: | slvdc1 [ Fri May 12, 2017 3:56 pm ] |
Post subject: | Re: Late model KK seat in KJ |
Hey Flash! Nice job!! Good catch on the latch hardware (mine is still mocked up). What did you do for the seatbelt latch? The ones I have are too long and look out of place. Are those the latches from the KK seat? Do they have compatible switches in for the airbag system? |
Author: | flash7210 [ Fri May 12, 2017 5:44 pm ] |
Post subject: | Re: Late model KK seat in KJ |
I still have a SRS light on. So something is not quite right. I tested the passenger side circuit and components without the seat and everything worked good. So I don't know what changed after installing the seats. I'm pretty sure is only the passenger side. I kept the KK latches attached to the seat. On the drivers side I just spliced into the factory wiring. It's only two wires. Passenger side is different and I think that's where I screwed up. |
Author: | flash7210 [ Sun May 14, 2017 1:35 pm ] |
Post subject: | Re: Late model KK seat in KJ |
After reading through the service manuals, I think I've narrowed it down to the Occupant Classification Module underneath the passenger seat. The pressure pad tested good and the seatbelt tension sensor seemed to test good. All that's left is the OCM. It was mentioned several times in the SM to be careful NOT to DROP the module. I know I dropped it and banged it around a few times. |
Author: | Lancer [ Sun May 21, 2017 2:50 am ] |
Post subject: | Re: Late model KK seat in KJ |
So the KK/Nitro seat back folds forward! It might sound silly, but I'd do that mod for that facility! |
Author: | slvdc1 [ Tue May 23, 2017 4:24 pm ] |
Post subject: | Re: Late model KK seat in KJ |
Yes!! Was able to fit a 7.5ft tall tree in the Jeep with the front pass seat folded flat. |
Author: | Dez [ Thu May 25, 2017 1:16 pm ] |
Post subject: | Re: Late model KK seat in KJ |
That new seat would be great for my laptop when tuning or running my scanner hehe. I'm going to keep my eyes peeled for a set. |
Author: | chris7488 [ Sun Aug 27, 2017 9:52 pm ] |
Post subject: | Re: Late model KK seat in KJ |
How about the back seats do they bolt on or modification required |
Author: | Myke [ Thu Sep 14, 2017 7:57 pm ] |
Post subject: | Re: Late model KK seat in KJ |
Any update on the srs light? |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |