LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Late model KK seat in KJ
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=86525		 Page 2 of 2
Author:  flash7210 [ Thu May 11, 2017 1:56 pm ]
Post subject:  Re: Late model KK seat in KJ
Pressure pad and harness removed from KJ seat
Image

Inserted into KK seat
Image
Author:  flash7210 [ Thu May 11, 2017 7:34 pm ]
Post subject:  Re: Late model KK seat in KJ
Portion of carpet and insulation removed.
Image

Test fitting the KK seat floor mount.
Image
Author:  flash7210 [ Thu May 11, 2017 7:37 pm ]
Post subject:  Re: Late model KK seat in KJ
Seat is in and bolted down.
I've now discovered that the seatbelt anchor bolt is a different size :banghead:
Author:  flash7210 [ Fri May 12, 2017 11:39 am ]
Post subject:  Re: Late model KK seat in KJ
Bolt and M10 washer for seatbelt anchor.
1 bolt + washer for each seat.

Image
Author:  flash7210 [ Fri May 12, 2017 11:43 am ]
Post subject:  Re: Late model KK seat in KJ
Had the same problem with carpet and insulation on the drivers side.
Be careful when cutting the carpet. The is a wiring harness under there.

Test fitting the seat mount after cutting carpet.
Image
Author:  flash7210 [ Fri May 12, 2017 11:50 am ]
Post subject:  Re: Late model KK seat in KJ
Seats successfully installed

Image

Image
Author:  slvdc1 [ Fri May 12, 2017 3:56 pm ]
Post subject:  Re: Late model KK seat in KJ
Hey Flash! Nice job!! Good catch on the latch hardware (mine is still mocked up). What did you do for the seatbelt latch? The ones I have are too long and look out of place. Are those the latches from the KK seat? Do they have compatible switches in for the airbag system?
Author:  flash7210 [ Fri May 12, 2017 5:44 pm ]
Post subject:  Re: Late model KK seat in KJ
I still have a SRS light on. So something is not quite right.
I tested the passenger side circuit and components without the seat and everything worked good. So I don't know what changed after installing the seats.
I'm pretty sure is only the passenger side.

I kept the KK latches attached to the seat.
On the drivers side I just spliced into the factory wiring. It's only two wires.
Passenger side is different and I think that's where I screwed up.
Author:  flash7210 [ Sun May 14, 2017 1:35 pm ]
Post subject:  Re: Late model KK seat in KJ
After reading through the service manuals, I think I've narrowed it down to the Occupant Classification Module underneath the passenger seat.

The pressure pad tested good and the seatbelt tension sensor seemed to test good.
All that's left is the OCM.

It was mentioned several times in the SM to be careful NOT to DROP the module.
I know I dropped it and banged it around a few times.
Author:  Lancer [ Sun May 21, 2017 2:50 am ]
Post subject:  Re: Late model KK seat in KJ
So the KK/Nitro seat back folds forward! It might sound silly, but I'd do that mod for that facility!
Author:  slvdc1 [ Tue May 23, 2017 4:24 pm ]
Post subject:  Re: Late model KK seat in KJ
Yes!! Was able to fit a 7.5ft tall tree in the Jeep with the front pass seat folded flat.
Author:  Dez [ Thu May 25, 2017 1:16 pm ]
Post subject:  Re: Late model KK seat in KJ
That new seat would be great for my laptop when tuning or running my scanner hehe. I'm going to keep my eyes peeled for a set.
Author:  chris7488 [ Sun Aug 27, 2017 9:52 pm ]
Post subject:  Re: Late model KK seat in KJ
How about the back seats do they bolt on or modification required
Author:  Myke [ Thu Sep 14, 2017 7:57 pm ]
Post subject:  Re: Late model KK seat in KJ
Any update on the srs light?
Page 2 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/