A little about what I have done. Removed head cleaned all the buildup out of it and the cam carrier/intake. Installed new exhaust valves, lifters, rocker arms, valve seals, and arp studs. While doing the work I installed the weeks stage 1,2 kits. It is all done and the truck drives good 40 miles now. But I looped out the viscous heater (relay already removed) and didn't take a picture of the coolant house routing of the engine before. I searched pictures and videos and I can't see a clear image of the hose routing. I need it so I know if I have my hoses on correctly. I don't want to cause engine damage. Any help would be appreciated.
_________________ 05 CRD Ltd new rockers, lifters, valves, arp's, weeks 1,2 Id silicone hoses full 3" exhaust, Carter intank pump, Hayden/GM fan 4”Lift Jba upper fronts, new front lowers, cut cv’s, bilsteins, 790’s, top plate, 2 conduit nuts, Iron Rock adjustable 3 link, custom diff bracket Jba 4” rear springs 16x8 rubi wheels 265/75 Yoko’s, manual tans/w231
|