Howdy folks, just thought I would share the part number for those that don't have it and have bought a used CRD where the previous owner spun the filter without disconnecting the leads. It is apparently in the 'connector catalog' that the dealer possesses, and in my case I couldn't tell which wire was which (there is a brown and a brown / red wire). It was explained to me that the brown /red wire is the sensor lead (no surprise) and the brown is ground. The connector part number is 5014005AA, I found it online for $25 instead of the $35 plus tax at the dealer. The wires are such that the sensor wire is to the left if you are looking in the connector opening (not the rear) and is the brown / red connection. The other is the brown, to the right....with the orientation of the plug with the clip at the top. Hope this helps other new owners!

Happy Jeepin!