LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
In search of fuel return line black plastic "TEE" Fitting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=87030 |
Page 1 of 1 |
Author: | racertracer [ Sat Aug 12, 2017 5:24 pm ] |
Post subject: | In search of fuel return line black plastic "TEE" Fitting |
I am looking for the part number of the fuel line return "T" fitting. This is a plastic black "T"- "TEE" fitting that connects to the top of the injector and is held on with a clip. It is part of the fuel return line. I recall that a member was able to source the same fitting from another company other than Jeep. |
Author: | flman [ Sat Aug 12, 2017 5:54 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
It is a Bosch part, maybe try Duramax on Ebay? |
Author: | racertracer [ Sat Aug 12, 2017 5:57 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
Tnx Flman... any ideas of what the part number is? |
Author: | Locked KJ [ Sat Aug 12, 2017 6:02 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
These guys have a kit that comes with multiple. I found another thread on LOST and multiple people said this works for the liberty http://www.xtremediesel.com/DTech-DT660023-Injector-Return-Line-Kit.aspx It also looks like these guys sell them individual. I know not quite what you asked for but i couldn't find a part# https://oregonfuelinjection.com/shop/sprinter-van/2004-2006-2-7-l-sprinter-van/return-conn-tee-cr-inj-ret-lly/ |
Author: | racertracer [ Sat Aug 12, 2017 8:34 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
Locked.... thank you |
Author: | geordi [ Sun Aug 13, 2017 9:06 am ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
You can also get it for about $30 from Autozone or Advance, ask them for the fuel return line from a 2500 series Chevy Duramax diesel. You can buy either the left or right banks, comes with all 4 tees and the spacing is pretty close that you only have a little extra tubing between each tee. |
Author: | GordnadoCRD [ Sun Aug 13, 2017 1:28 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
Duramax parts are exactly the same, work perfectly, and cost MUCH less. |
Author: | WWDiesel [ Sun Aug 13, 2017 2:57 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
GordnadoCRD wrote: Duramax parts are exactly the same, work perfectly, and cost MUCH less. True, and I believe they are one in the same! |
Author: | geordi [ Sun Aug 13, 2017 3:13 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
There is a slight physical appearance difference, but not in any way that means anything. It is slightly taller and might be more durable... But still, for the cost savings, go with the Duramax part. |
Author: | racertracer [ Sun Aug 13, 2017 8:55 pm ] |
Post subject: | Re: In search of fuel return line black plastic "TEE" Fittin |
Thanks, I got them. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |