I was messing with my 06 CRD a little today and made the Check Engine Light come on. I was just messing with some vacuum lines under the hood (boost gauge install) and drove it for a minute with one of the lines off. Then the CEL came on and I found the line I forgot and put it back on. But now I can't read out or clear the code. On all the other DC vehicles I know of you can read the codes out by cycling the key on-off 3 times. But this doesn't work on the CRD.

_________________
2006 CRD

I know you're looking for something quicker, but if you've fixed the problem it will go off on its own in a few days.

_________________
Matt B.

05 Limited CRD. Bought it new. 112k on the clock now.

GDE Eco-tune, rear differential drain plug (drilled and tapped the pumpkin), transmission pan drain plug, Fumoto oil valve, fuel filler neck restriction removed, front hitch, Hayden fan clutch, Sears P1 battery since 08, Mobil 1 5w40, 5 volt glow plugs, DIY timing belt at 109k

Got it. It actually went off on my drive home. But I still wonder how to pull codes out of it.

_________________
2006 CRD

Go to a autozone stone, they will read and clear the codes for free.

_________________
[iurl]http://home.comcast.net/~n3qik/Site/Welcome.html[/url]