Sourcing connector for Temperature sensor

racertracer · **Posted:** Wed Sep 06, 2017 10:51 pm

I am looking for the electrical connector that connects to the temperature sensor that is located on the side of the air box, the one with the Mercedes badge on it.

It's a tiny connector that is on back order, the cost for this small connector is over 65 dollars. Anyone know of another source for this connector?

LarryK · **Joined:** Thu Apr 27, 2017 12:07 pm **Posts:** 5

I just bought used sensor with connector on Ebay for $15.00 shipped. Had different sized pins but I replaced sensor also . Works fine. I think that all of these sensors that fit are the same.

racertracer · **Posted:** Thu Sep 07, 2017 3:48 am

How did you find it on eBay and do you have a link?

What part number did you use?

LarryK · **Joined:** Thu Apr 27, 2017 12:07 pm **Posts:** 5

This is a pressure sensor not temp. It measures the air pressure at the turbo intake. Search Ebay for ambient air pressure sensor. The one I ordered was for a Mercedes but is the same one used on the Jeep. I was used not new.. You just have to keep looking they often show up. You may get one from an salvage yard with the connector. Any mercedes. chrysler unit that will fit should work.

WWDiesel · **Posted:** Fri Sep 08, 2017 9:01 am

This is the part number:
Mopar Connection Repair:> http://connectors.dcctools.com/results.htm
INTAKE PRESSURE SENSOR (DIESEL) - 3 WAY
Full Repair Kit: 68032284AA

It is available new at a few locations. Google the PN
Some refer to it as a Siren connection, go figure:
Most of the Mopar on-line retailers list it for ~37 bucks.

RockAuto list it ~$27:> http://www.rockauto.com/en/catalog/chev ... ctor,15946

:SOMBRERO:

Sourcing connector for Temperature sensor

Who is online