It is currently Fri Apr 26, 2024 3:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: New Plates and a "Freshin' Up" for the old DAWG
PostPosted: Tue Sep 26, 2017 1:47 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
http://i205.photobucket.com/albums/bb97/DarbyWalters/DSLDWG.jpg...SOORY PHOTOBUCKET and thier 3rd Party BS won't let the image be seen...


Jim Hulse came and we did a Timing Belt/Water Pump/HOAT/Rocker Arm and Valve Job. Now I am getting aprts together to freshin' up some other things...SUNCOAST TC, Ft Driveshaft CV Joint, Ft Driveshaft Transfer Case CV Joint, Motor Mounts, Transmission Mount and Rear Passenger Window Motor and Rail...

Then I will look into the interior...Door Cards/Panels Front, Maybe Stereo Upgrade and Definitely Front Seats need to be rebuilt for comfort.

195,000 miles looking for 300,000

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Last edited by DarbyWalters on Tue Sep 26, 2017 1:56 pm, edited 1 time in total.
Can't get PIC to POST


Top
 Profile  
 
 Post subject: Re: New Plates and a "Freshin' Up" for the old DAWG
PostPosted: Tue Sep 26, 2017 7:40 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 03, 2007 2:07 am
Posts: 6217
Location: Colorado Baby!
Valve job? What happened?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic


Top
 Profile  
 
 Post subject: Re: New Plates and a "Freshin' Up" for the old DAWG
PostPosted: Fri Sep 29, 2017 2:32 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
Sir Sam wrote:
Valve job? What happened?


Nothing...decided since we were down that far into the engine...go ahead and replace rockers and valves

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 135 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com