69Hcode wrote:
I'm trying to find a good part number for a transmission dipstick tube grommet and the clips in the oil cooler line fittings.
Any help would be appreciated. Thanks
Transmission Oil filler tube to Case grommet P/N: 04810021AB
Google this P/N or go here:>
https://www.factorychryslerparts.com/pr ... 021AB.htmlTransmission cooler line clips, there are two different styles in use (see diagram):
#5. a metal clip that simply clips both metal lines together (may be more than one of these used?)
#6. a plastic one that is anchored to stud on the engine oil pan. Both lines are clipped into this one and it slips over a stud on the bottom of the engine oil pan.
Note: Some just simply split a short length of 3/8 rubber or fuel hose and sandwich it between the two lines and secure it all with some good tie wraps.
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve