flash7210 wrote:
Looks like Napa only liste CV axles for the 3.7 v6 engine. None for either of the 4cyl engines.
Does anybody know exactly what the CV axles lengths should be for the CRD?
Some of the listings on RockAuto state the compressed axle length but I dont know how to be sure they are correct.
When compared to the 3.7 engine axles on RockAuto they do appear to be different but again, I dont know what is correct for either engine.
The Mopar part numbers are definitely different between the 2.8 4 cyl. CRD & the 3.7 V6 gasser!
Mopar P/N for 3.7 V6 gasser:52111779AB Axle Shaft Assembly LIBERTY; 3.7L; LEFT
52111778AB Axle Shaft Assembly LIBERTY; 3.7L; RIGHT
Mopar P/N for 2.8 4cyl Diesel:
52111781AB Axle Shaft Assembly LIBERTY; 2.8L; LEFT
52111780AB Axle Shaft Assembly LIBERTY; 2.8L; RIGHT
NOTE of interest: All 2002-2005 Jeep Liberty with the
4 cyl gas engine use the same CV axle part numbers (L&R) as the 2005-2006 diesel powered Liberty's...
So, If they don't list the CRD engine, simply ask for a 02-05 Liberty with the 4 cyl. gas engine!
NAPA does not list a 4 cyl. gas engine option either on their web search page!
As to axle lengths, found this:
Length 52111781AB AXLE HALF 26.63 (in?)
Length 52111780AB AXLE HALF 28.06
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve