googled, and read up on several comments, looked at pictures etc. Could not see a definitive Y or N. I was replacing the thermostat and my turbo inlet has the rotted air inlet hose. I accidentally broke the bypass hose from the CCV. Trying to figure out options. Replace wtih Samco (I don't have a bypass/mod for the CCV) or replace oem connector hose and bypass hose from the CCV. BTW flushing out the factory coolant for zerex G-05 has been a . That patch-cock ugh. my 5/8" only catches every 3rd turn.

_________________
'05 CRD Liberty Sport - no mods... yet.

Samco doesn't make a air filter to turbo hose that Im aware of. Only option is a factory sourced one.

Correct, there is no Samco replacement inlet hose, only the turbo outlet to CAC and CAC to intake manifold.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

Turbocharger Inlet Hose (Liberty CRD)
OEM Mopar Part Number: 53013104AE

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I made my own with 2.25" to 2.5 " 90 degree silicone elbow 2.5 0d x 2.5 L pipe fitted connection in center then 2.5 to 3.5 elbow for my k$n filter used 3" pvc sewer 45 degree fittings to allow for sensors it works very well making another one for 2nd crd
regards