LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

does the samco hose have an inlet for ccv
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=87385		 Page 1 of 1
Author:  jophi [ Sat Nov 04, 2017 4:57 pm ]
Post subject:  does the samco hose have an inlet for ccv
googled, and read up on several comments, looked at pictures etc. Could not see a definitive Y or N. I was replacing the thermostat and my turbo inlet has the rotted air inlet hose. I accidentally broke the bypass hose from the CCV. Trying to figure out options. Replace wtih Samco (I don't have a bypass/mod for the CCV) or replace oem connector hose and bypass hose from the CCV. BTW flushing out the factory coolant for zerex G-05 has been a :furious: :banghead: :dizzy: . That patch-cock ugh. my 5/8" only catches every 3rd turn.
Author:  Dez [ Sat Nov 04, 2017 5:51 pm ]
Post subject:  Re: does the samco hose have an inlet for ccv
Samco doesn't make a air filter to turbo hose that Im aware of. Only option is a factory sourced one.
Author:  mass-hole [ Sat Nov 04, 2017 7:30 pm ]
Post subject:  Re: does the samco hose have an inlet for ccv
Correct, there is no Samco replacement inlet hose, only the turbo outlet to CAC and CAC to intake manifold.
Author:  WWDiesel [ Sat Nov 04, 2017 9:03 pm ]
Post subject:  Re: does the samco hose have an inlet for ccv
Turbocharger Inlet Hose (Liberty CRD)
OEM Mopar Part Number: 53013104AE
:wink:
Author:  dh100m [ Sun Nov 05, 2017 6:53 am ]
Post subject:  Re: does the samco hose have an inlet for ccv
I made my own with 2.25" to 2.5 " 90 degree silicone elbow 2.5 0d x 2.5 L pipe fitted connection in center then 2.5 to 3.5 elbow for my k$n filter used 3" pvc sewer 45 degree fittings to allow for sensors it works very well making another one for 2nd crd
regards
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/