LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
06 CRD 80k Nuts in a can noise http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=87520 |
Page 1 of 1 |
Author: | JeepCRD4Me [ Sat Dec 09, 2017 3:13 pm ] |
Post subject: | 06 CRD 80k Nuts in a can noise |
So after the big nut in a coffee can sounds came the run time was maybe 15 second. Also is that fan clutch nut a left or right to remove. Its is giving us fits. I am going to move this to a new thread. |
Author: | Mountainman [ Sat Dec 09, 2017 6:08 pm ] |
Post subject: | Re: 06 CRD 80k Nuts in a can noise |
Standard threads. I put a really big crescent wrench on it and hit it with a big hammer. PB blaster it and let it soak first if necessary |
Author: | JeepCRD4Me [ Sat Dec 09, 2017 6:21 pm ] |
Post subject: | Re: 06 CRD 80k Nuts in a can noise |
We have a fan clutch wrench. The air driven type we are wackin with big hammer. We ran out of time today. Back are it on Thursday. How can I get my hands on a top center jig to hold the drive train in place well apart? any knowledge about left or right to take off? |
Author: | flash7210 [ Sat Dec 09, 2017 8:00 pm ] |
Post subject: | Re: 06 CRD 80k Nuts in a can noise |
JeepCRD4Me wrote: We have a fan clutch wrench. The air driven type we are wackin with big hammer. We ran out of time today. Back are it on Thursday. How can I get my hands on a top center jig to hold the drive train in place well apart? any knowledge about left or right to take off? What are you talking about? I thought you were only trying to remove the valve cover? |
Author: | geordi [ Sat Dec 09, 2017 10:26 pm ] |
Post subject: | Re: 06 CRD 80k Nuts in a can noise |
I'm across the state in Boca if you would like my assistance in tearing it down. I am the traveling mechanic for the CRD and I have and bring all the tools needed to do the work, and I do not think you have a very serious issue - certainly not a dropped valve. Anything that your engine does have at this point is abundantly fixable. I would offer more answers to your questions, but that last post has me scratching my head a bit too... What exactly did you mean? |
Author: | Mountainman [ Sun Dec 10, 2017 12:48 am ] |
Post subject: | Re: 06 CRD 80k Nuts in a can noise |
Lefty loosy, easiest with the belt still on or a 13mm socket going through one of the holes on the hub to the bolt, this adds more resistance to help the fan break loose |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |