theeld wrote:
Can anyone confirm the actual length of the CRD version of left CV axle? I just ordered one from napa that is listed as 24.5". Autozone lists theirs as 23.75". One of those must be for the CRD???
The correct NAPA PN for the short axle is: NMD 958483 :>
https://www.napaonline.com/en/p/NMD958483Specifications
Contents Axle Nut Included
CV Driveshaft Compressed Length 23 3/4 in.CV Driveshaft Thread Size M24 x 2.0
Inboard Joint Type Spline
Includes ABS Inner Sensor Ring No
Inner Joint Spline Count 27
Longevity Enhancements 3% Moly Grease
New Components Neoprene Boots
Outboard Joint Type Spline
Outer Joint Spline Count 27
UNSPSC 25173807
Found this online:
Description:
CV Axle Inboard Joint Type: Male
CV Axle Inboard Spline Count: 27
CV Axle Length: "23 3/4"""
CV Axle Length: 23 3/4"CV Axle Length Measurement Method: Compressed
CV Axle Nut Head Size: 36mm Hex Head
CV Axle Nut Length: OAH 20.8mm
CV Axle Nut Locking Type: Self Lock
CV Axle Nut Thread Size: M24x2.0
CV Axle Outboard Joint Type: Male
CV Axle Outboard Spline Count: 27
CV Axles Inboard Spline Count: 27
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve