LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Does anyone have the pin info for the lift pump?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=87727		 Page 1 of 1
Author:  Sir Sam [ Sat Jan 20, 2018 12:49 pm ]
Post subject:  Does anyone have the pin info for the lift pump?
The connector under the seat isn't in the manual, and its been so long I don't recall what pins where what, I was wanting to build a connector pinout and hoping someone know which pins were which for the 2006 (and 2005).

I have a 2005 here that I can pinout to built a pinout diagram, but I don't have a 2006 anymore.

Thanks all.
Author:  papaindigo [ Sat Jan 20, 2018 3:20 pm ]
Post subject:  Re: Does anyone have the pin info for the lift pump?
Maybe this post will help
viewtopic.php?t=26385&postdays=0&postorder=asc&start=20
Author:  Sir Sam [ Sat Jan 20, 2018 4:23 pm ]
Post subject:  Re: Does anyone have the pin info for the lift pump?
papaindigo wrote:
Maybe this post will help
viewtopic.php?t=26385&postdays=0&postorder=asc&start=20


Thanks thats a good post. I'm looking to put together a wiring diagram since its missing in the FSM.

Anyone need a pump install in northern CO and in no particular hurry? Wanting to document the process and my KJ already has it.
Author:  GordnadoCRD [ Sun Jan 21, 2018 4:07 pm ]
Post subject:  Re: Does anyone have the pin info for the lift pump?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=23099&start=120
Does this help?

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=267112#p267112
Or this?
Author:  WWDiesel [ Sun Jan 21, 2018 5:39 pm ]
Post subject:  Re: Does anyone have the pin info for the lift pump?
Sir Sam wrote:
papaindigo wrote:
Maybe this post will help
viewtopic.php?t=26385&postdays=0&postorder=asc&start=20

Thanks thats a good post. I'm looking to put together a wiring diagram since its missing in the FSM.
Anyone need a pump install in northern CO and in no particular hurry? Wanting to document the process and my KJ already has it.

This was a tough one!!!
How about this? It comes from the Mopar Connector Repair Kit Web Site.
Info on Connector number 307 which is identified in some of the wiring diagram one lines in the FSM for diesel.
Notice the circuit K300 and K304 are clearly identified in diagram number 8W-30-29 for the fuel level sensor signal in the fuel module for the diesel. :roll:
You will not find any WD's showing the fuel pump circuit for the diesel! I looked hard!!! :shock:
If you need help with drawing a WD for our application, let me know! I may be able to simply add it to some of the existing ones?

ImageImage
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/