MOSFET wrote:
That silicone vacuum hose looks a lot more durable. What size (i.e., ID) did you get? Was it 5/32" - 4mm ID?
I actually ordered several different sizes and extra amounts to have in stock for future use. 3.5mm, 4mm, 5mm, & 6mm.
I replaced ALL of the vacuum hoses in the engine compartment from the connection point on the brake booster over to the turbo vane controls and the hose to the HVAC controls.
There are two different size hoses, smaller one on turbo controls and going to vane actuator, and slightly larger ones on supply hoses to turbo vacuum canister and HVAC going into inside of vehicle.
I believe these were the sizes, but would have to go measure to be 100% sure since I had also ordered some 3.5mm hose.
Smaller hose was 4mm (5/32)
Larger one was 5mm (3/16)
Best to measure before ordering to be 100% sure.
Items replaced:Replaced all of these OEM hoses and tubing with this:
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve