| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Plastic turbo vacuum hose part # http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=87808 |
Page 1 of 1 |
| Author: | theeld [ Mon Feb 12, 2018 9:04 am ] |
| Post subject: | Plastic turbo vacuum hose part # |
Hey Guys, It looks like my P0299 code is caused by a broken hose that looks to go from the turbo actuator nipple (thats my name for it), to a vacuum type thing on the passenger side of the engine bay. On the first image I think it is the far left hose (left of the number 1). The hard plastic hose is also pictured in the second image, starts on the exteme left of the image and ends at the extreme bottom. Anyone know of a part number for this hose?  
|
|
| Author: | flash7210 [ Mon Feb 12, 2018 10:16 am ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
Just use regular ol rubber vacuum hose. |
|
| Author: | MOSFET [ Mon Dec 16, 2019 4:12 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
What is the part number for the far left hose attached to element 1 above? |
|
| Author: | WWDiesel [ Mon Dec 16, 2019 11:09 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
MOSFET wrote: What is the part number for the far left hose attached to element 1 above? Just order some good silicone vacuum hose and use it to replace all the molded rubber hoses and flimsy plastic tubing. Flex Technologies Incorporated http://www.siliconehose.com/ 
|
|
| Author: | MOSFET [ Tue Dec 17, 2019 7:43 am ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
That silicone vacuum hose looks a lot more durable. What size (i.e., ID) did you get? Was it 5/32" - 4mm ID? |
|
| Author: | WWDiesel [ Tue Dec 17, 2019 3:22 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
MOSFET wrote: That silicone vacuum hose looks a lot more durable. What size (i.e., ID) did you get? Was it 5/32" - 4mm ID? I actually ordered several different sizes and extra amounts to have in stock for future use. 3.5mm, 4mm, 5mm, & 6mm. I replaced ALL of the vacuum hoses in the engine compartment from the connection point on the brake booster over to the turbo vane controls and the hose to the HVAC controls. There are two different size hoses, smaller one on turbo controls and going to vane actuator, and slightly larger ones on supply hoses to turbo vacuum canister and HVAC going into inside of vehicle. I believe these were the sizes, but would have to go measure to be 100% sure since I had also ordered some 3.5mm hose. Smaller hose was 4mm (5/32) Larger one was 5mm (3/16) Best to measure before ordering to be 100% sure. Items replaced:  Replaced all of these OEM hoses and tubing with this:     
|
|
| Author: | PZKW108 [ Thu Dec 19, 2019 12:32 am ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
WWDiesel wrote: MOSFET wrote: That silicone vacuum hose looks a lot more durable. What size (i.e., ID) did you get? Was it 5/32" - 4mm ID? I actually ordered several different sizes and extra amounts to have in stock for future use. 3.5mm, 4mm, 5mm, & 6mm. I replaced ALL of the vacuum hoses in the engine compartment from the connection point on the brake booster over to the turbo vane controls and the hose to the HVAC controls. There are two different size hoses, smaller one on turbo controls and going to vane actuator, and slightly larger ones on supply hoses to turbo vacuum canister and HVAC going into inside of vehicle. I believe these were the sizes, but would have to go measure to be 100% sure since I had also ordered some 3.5mm hose. Smaller hose was 4mm (5/32) Larger one was 5mm (3/16) Best to measure before ordering to be 100% sure. Items replaced: Replaced all of these OEM hoses and tubing with this: Now you need to sell a kit !! |
|
| Author: | TURBO-DIESEL-FREAK [ Thu Dec 19, 2019 4:46 am ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
I agree with PZKW108; this looks like a great upgrade! |
|
| Author: | WWDiesel [ Thu Dec 19, 2019 2:10 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
PZKW108 wrote: Now you need to sell a kit !! TURBO-DIESEL-FREAK wrote: I agree with PZKW108; this looks like a great upgrade! If you are interested in a kit, let me know, I will have to look into putting one together and compute cost! It would consist of all the necessary precut hoses labeled for location and necessary hose connections (plastic) along with written instructions and pictures. |
|
| Author: | JeepLovR [ Wed Feb 26, 2020 11:36 am ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
Wow that's a great idea! I was just thinking of doing the same.  Let me know if you're doing a kit. I would probably go with a black or blue hose though; make it less obvious 
|
|
| Author: | WWDiesel [ Wed Feb 26, 2020 1:33 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
JeepLovR wrote: Wow that's a great idea! I was just thinking of doing the same. Let me know if you're doing a kit. I would probably go with a black or blue hose though; make it less obvious The hoses are silicone hoses, not plastic. sent you a PM |
|
| Author: | timothyd [ Wed Dec 30, 2020 7:31 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
Bringing this back up, I am going to be doing the head gasket and wanted to do this at the same time, do you have a kit for this or at least the numbers needed to order all of it? |
|
| Author: | WWDiesel [ Wed Dec 30, 2020 10:57 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
timothyd wrote: Bringing this back up, I am going to be doing the head gasket and wanted to do this at the same time, do you have a kit for this or at least the numbers needed to order all of it? Flex Technologies Incorporated has the silicone vacuum hoses in bulk by the foot at good prices. https://www.siliconehose.com/ Order some 4mm & 5mm, it takes both if you want to replace all vacuum hoses under the hood. I need to do a drawing showing all the hoses, sizes, fittings, and lengths. 
|
|
| Author: | timothyd [ Thu Dec 31, 2020 12:48 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
Does 10 foot of each sound like enough? |
|
| Author: | WWDiesel [ Thu Dec 31, 2020 5:51 pm ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
timothyd wrote: Does 10 foot of each sound like enough? That is a gracious plenty! You will have some leftover for other projects or vehicles. 
|
|
| Author: | jagster936 [ Sun Apr 10, 2022 12:55 am ] |
| Post subject: | Re: Plastic turbo vacuum hose part # |
Wow this is very interesting; bookmarking for future CRD issues lol. What is a good amount to order? Maybe 3-5 feet? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|