LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Throttle position switch
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=87942
Page 1 of 1

Author:  Dent [ Wed Mar 21, 2018 6:50 pm ]
Post subject:  Throttle position switch

Another issue. Seems the throttle position switch might be acting up. The red light came on twice and the car is surging and losing power. Anyone have a source for the TPS on the CRD?

Author:  papaindigo [ Wed Mar 21, 2018 7:56 pm ]
Post subject:  Re: Throttle position switch

If you mean the switches on the top of the go pedal I have a used but functional spare go pedal with both sensors. If interested email me rather than PM

Author:  Sir Sam [ Wed Mar 21, 2018 11:26 pm ]
Post subject:  Re: Throttle position switch

You need the whole pedal assembly essentially.

However I would suggest you read the APPS (accelerator pedal position sensor) #1 and #2 feedback with a quality scanner tool and trend the data over a whole sweep from 0-100 position. Thats the best first check to see what the issue is instead of throwing parts at it.

Otherwise there are probably lots of these available in junked CRDs since its not a common replacement item.

Try car-part.com for a replacement.

Author:  WWDiesel [ Fri Mar 23, 2018 2:59 pm ]
Post subject:  Re: Throttle position switch

Pedal assembly can also be purchased from Rock Auto or IDParts and it includes the APP sensor.

https://www.rockauto.com/en/parts/mopar ... edal,12130

https://www.idparts.com/accelerator-ped ... -3926.html

Image

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/