Recently removed the intake elbow to replace the ceramic GPs with the Bosch steel 5V. (150K and only one GP exhibits a small crack starting near the tip).
It was noted that ERG pipe to intake elbow joint had some orange silicone on it.
When rejoining with the clamp, is it necessary to reapply orange silicone to this joint?

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

Having recently been fighting leaks in the intake path, I'd say yes. Even a small leak can cause a fairly dramatic drop in power and economy.

_________________
2005 KJ CRD Limited 4x4:
245/75R16 BFG TA KO2s
OME / Clevis 2.5" Lift
JBA Lifted A-Arms
IRO WJ Short Rear UCA/WWDiesel mount
Skid Row Skidplates
HDS Model 001 Thermostat (190°F)
Suncoast TC
Full Weeks Kit
Bosch 5V glow plugs
Hayden 2986 fan clutch / GM 11-blade fan
Samco / Sasquatch Intake Hoses
Carter in-tank pump
Provent 200
V6 Airbox

Thanks for the reply. Just trying to get the clamp on now. Kinda a bad location-like everything else.
Now I'm trying to imagine doing it with silicone, that's after getting the silicone in there..

BTW- next time I do anything on this vehicle, I'm just gonna drop the whole engine out the bottom and stuff it back up when done!

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

If you pull the Alternator, Battery w/tray, grille cover, and left front headlight housing, pretty much everything on that side opens up, and it's only about an hour's work if that. (each way)

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770

Better yet, install a Weeks Elbow Kit from SasquatchParts.com and get rid of all that EGR crap and possible leak points!
https://shop.sasquatchparts.com/product ... berty-crd/

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve